Beaver Lake Dam, North Dakota, USA

Home / USA / North Dakota / Beaver Lake Dam

Quick Facts About Beaver Lake Dam

Location: Logan, North Dakota
Coordinates: 46.38322, -99.61023
River: Beaver Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1934
Dam Height: 7 ft (2 m)
Dam Length: 562 ft (171 m)
Dam Capacity: 5,319 acre-ft (6,561 Ml)

Beaver Lake Dam Map

Here is a map of Beaver Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Beaver Lake Dam Information

Beaver Lake Dam is an earthen embankment dam located about 2 miles from Burnstad, Logan, North Dakota.

The dam, which is on the Beaver Creek River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by CCC & ND DWR and commissioned in 1934 and is currently owned by Logan County WRB.

Beaver Lake Dam Structure

The Beaver Lake Dam is approximately 562 feet (171 m) long, 7 feet (2 m) high and has a structural volume of 1,756 cubic yards (1,343 cubic metres).

Beaver Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,319 acre-ft (6,561 Ml) and maximum capacity of 5,319 acre-ft (6,561 Ml).

The surface area of the reservoir is 953 acres (386 ha) and the total catchment area is 179 square miles (464 square kilometres).

Beaver Lake Dam Spillway

The dam has a 150 feet (46 m) wide uncontrolled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Beaver Lake Dam Compared to Four Famous American Dams

Beaver Lake Dam
Logan, North Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 7 730 550 357 216
Length (Ft) 562 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,319 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 179 167,800 74,100 3,611 108,355

Beaver Lake Dam Weather

Current Conditions at Beaver Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Beaver Lake Dam

Failed to fetch weather forecast data.

Beaver Lake Dam Frequently Asked Questions

In which state is the Beaver Lake Dam?

Beaver Lake Dam is in North Dakota.

In which county is the Beaver Lake Dam?

Beaver Lake Dam is in Logan County.

How high is the Beaver Lake Dam?

Beaver Lake Dam is 7 feet high.

How long is the Beaver Lake Dam?

Beaver Lake Dam is 562 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG