Buffalo Lake Dam, North Dakota, USA

Home / USA / North Dakota / Buffalo Lake Dam

Quick Facts About Buffalo Lake Dam

Location: Pierce, North Dakota
Coordinates: 47.99966, -99.827415
River: Buffalo Coulee River
Primary Purpose: Fish and Wildlife Pond
Type: Earth
Commissioned: 1930
Dam Height: 9 ft (3 m)
Dam Length: 4,250 ft (1,295 m)
Dam Capacity: 11,200 acre-ft (13,815 Ml)

Buffalo Lake Dam Map

Here is a map of Buffalo Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Buffalo Lake Dam Information

Buffalo Lake Dam is an earthen embankment dam located in Pierce County, North Dakota.

The dam, which is on the Buffalo Coulee River, was primarily built for Fish and Wildlife Pond purposes, but also serves for benefits.

The dam was designed by and commissioned in 1930 and is currently owned by US FISH AND WILDLIFE SERVICE.

Buffalo Lake Dam Structure

The Buffalo Lake Dam is approximately 4,250 feet (1,295 m) long, 9 feet (3 m) high and has a structural volume of 52,600 cubic yards (40,216 cubic metres).

Buffalo Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,200 acre-ft (6,414 Ml) and maximum capacity of 11,200 acre-ft (13,815 Ml).

The surface area of the reservoir is 990 acres (401 ha) and the total catchment area is 384 square miles (995 square kilometres).

Buffalo Lake Dam Spillway

The dam has a 62 feet (19 m) wide uncontrolled spillway with a maximum discharge capacity of 1028 cubic feet per second (29 cubic metres per second).

Buffalo Lake Dam Compared to Four Famous American Dams

Buffalo Lake Dam
Pierce, North Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 9 730 550 357 216
Length (Ft) 4,250 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 384 167,800 74,100 3,611 108,355

Buffalo Lake Dam Weather

Current Conditions at Buffalo Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Buffalo Lake Dam

Failed to fetch weather forecast data.

Buffalo Lake Dam Frequently Asked Questions

In which state is the Buffalo Lake Dam?

Buffalo Lake Dam is in North Dakota.

In which county is the Buffalo Lake Dam?

Buffalo Lake Dam is in Pierce County.

How high is the Buffalo Lake Dam?

Buffalo Lake Dam is 9 feet high.

How long is the Buffalo Lake Dam?

Buffalo Lake Dam is 4,250 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG