Homme Dam, North Dakota, USA

Home / USA / North Dakota / Homme Dam

Quick Facts About Homme Dam

Location: Walsh, North Dakota
Coordinates: 48.404682, -97.7912872
River: South Branch Of Park River
Primary Purpose: Water Supply
Type: Concrete Earth
Commissioned: 1950
Dam Height: 50 ft (15 m)
Dam Length: 865 ft (264 m)
Dam Capacity: 7,000 acre-ft (8,634 Ml)
Condition Assessment: Not Available

Homme Dam Map

Here is a map of Homme Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Homme Dam Information

Homme Dam is a concrete earth dam located about 2 miles from Park River, Walsh, North Dakota.

The dam, which is on the South Branch Of Park River, was primarily built for Water Supply purposes, but also serves for Fish and Wildlife Pond, Recreation and Flood Risk Reduction benefits.

The dam was designed by CEMVP and commissioned in 1950 and is currently owned by USACE – St. Paul District.

Homme Dam Structure

The Homme Dam is approximately 865 feet (264 m) long, 50 feet (15 m) high and has a structural volume of 331,900 cubic yards (253,756 cubic metres).

Homme Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,550 acre-ft (4,379 Ml) and maximum capacity of 7,000 acre-ft (8,634 Ml).

The surface area of the reservoir is 290 acres (117 ha) and the total catchment area is 226 square miles (585 square kilometres).

Homme Dam Spillway

The dam has a 218 feet (66 m) wide uncontrolled spillway with a maximum discharge capacity of 23500 cubic feet per second (665 cubic metres per second).

Homme Dam Compared to Four Famous American Dams

Homme Dam
Walsh, North Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 50 730 550 357 216
Length (Ft) 865 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 226 167,800 74,100 3,611 108,355

Homme Dam Weather

Current Conditions at Homme Dam

Failed to fetch current weather data.

7-Day Forecast for Homme Dam

Failed to fetch weather forecast data.

Homme Dam Frequently Asked Questions

In which state is the Homme Dam?

Homme Dam is in North Dakota.

In which county is the Homme Dam?

Homme Dam is in Walsh County.

How high is the Homme Dam?

Homme Dam is 50 feet high.

How long is the Homme Dam?

Homme Dam is 865 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG