Jim Dam, North Dakota, USA

Home / USA / North Dakota / Jim Dam

Quick Facts About Jim Dam

Location: Stutsman, North Dakota
Coordinates: 47.16252, -98.78746
River: James River
Primary Purpose: Fish and Wildlife Pond
Type: Earth
Commissioned: 1937
Dam Height: 9 ft (3 m)
Dam Length: 1,850 ft (564 m)
Dam Capacity: 5,350 acre-ft (6,599 Ml)

Jim Dam Map

Here is a map of Jim Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Jim Dam Information

Jim Dam is an earthen embankment dam located about 18 miles from Jamestown, Stutsman, North Dakota.

The dam, which is on the James River, was primarily built for Fish and Wildlife Pond purposes, but also serves for benefits.

The dam was designed by USFWS & USBS and commissioned in 1937 and is currently owned by USFWS.

Jim Dam Structure

The Jim Dam is approximately 1,850 feet (564 m) long, 9 feet (3 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Jim Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,350 acre-ft (6,599 Ml) and maximum capacity of 5,350 acre-ft (6,599 Ml).

The surface area of the reservoir is 0 acres (0 ha) and the total catchment area is 0 square miles (0 square kilometres).

Jim Dam Spillway

According to the latest available data, the Jim Dam does not have any spillways.

Jim Dam Compared to Four Famous American Dams

Jim Dam
Stutsman, North Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 9 730 550 357 216
Length (Ft) 1,850 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,350 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 0 167,800 74,100 3,611 108,355

Jim Dam Weather

Current Conditions at Jim Dam

Failed to fetch current weather data.

7-Day Forecast for Jim Dam

Failed to fetch weather forecast data.

Jim Dam Frequently Asked Questions

In which state is the Jim Dam?

Jim Dam is in North Dakota.

In which county is the Jim Dam?

Jim Dam is in Stutsman County.

How high is the Jim Dam?

Jim Dam is 9 feet high.

How long is the Jim Dam?

Jim Dam is 1,850 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG