Lake Zahl Dam, North Dakota, USA

Home / USA / North Dakota / Lake Zahl Dam

Quick Facts About Lake Zahl Dam

Location: Williams, North Dakota
Coordinates: 48.54857, -103.68105
River: Pats Coulee River
Primary Purpose: Fish and Wildlife Pond
Type: Earth
Commissioned: 1937
Dam Height: 9 ft (3 m)
Dam Length: 900 ft (274 m)
Dam Capacity: 9,720 acre-ft (11,989 Ml)

Lake Zahl Dam Map

Here is a map of Lake Zahl Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Zahl Dam Information

Lake Zahl Dam is an earthen embankment dam located about 27 miles from Williston, Williams, North Dakota.

The dam, which is on the Pats Coulee River, was primarily built for Fish and Wildlife Pond purposes, but also serves for benefits.

The dam was designed by USFWS and commissioned in 1937 and is currently owned by USFWS.

Lake Zahl Dam Structure

The Lake Zahl Dam is approximately 900 feet (274 m) long, 9 feet (3 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Lake Zahl Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,003 acre-ft (3,704 Ml) and maximum capacity of 9,720 acre-ft (11,989 Ml).

The surface area of the reservoir is 1,300 acres (526 ha) and the total catchment area is 53 square miles (136 square kilometres).

Lake Zahl Dam Spillway

The dam has a 419 feet (128 m) wide uncontrolled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Lake Zahl Dam Compared to Four Famous American Dams

Lake Zahl Dam
Williams, North Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 9 730 550 357 216
Length (Ft) 900 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,720 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 53 167,800 74,100 3,611 108,355

Lake Zahl Dam Weather

Current Conditions at Lake Zahl Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Zahl Dam

Failed to fetch weather forecast data.

Lake Zahl Dam Frequently Asked Questions

In which state is the Lake Zahl Dam?

Lake Zahl Dam is in North Dakota.

In which county is the Lake Zahl Dam?

Lake Zahl Dam is in Williams County.

How high is the Lake Zahl Dam?

Lake Zahl Dam is 9 feet high.

How long is the Lake Zahl Dam?

Lake Zahl Dam is 900 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG