Slurry #1 Dam, Ohio, USA

Home / USA / Ohio / Slurry #1 Dam

Quick Facts About Slurry #1 Dam

Location: Meigs, Ohio
Coordinates: 39.0725, -82.241667
River: River
Primary Purpose: Tailings
Type: Earth
Commissioned:
Dam Height: 190 ft (58 m)
Dam Length: 2,300 ft (701 m)
Dam Capacity: 16,500 acre-ft (20,352 Ml)
Condition Assessment: Not Available

Slurry #1 Dam Map

Here is a map of Slurry #1 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Slurry #1 Dam Information

Slurry #1 Dam is an earthen embankment dam located about 5 miles from Langsville, Meigs, Ohio.

The dam, which is on the River, was primarily built for Tailings purposes, but also serves for benefits.

The dam was designed by and commissioned in and is currently owned by CONSOL Mining Company.

Slurry #1 Dam Structure

The Slurry #1 Dam is approximately 2,300 feet (701 m) long, 190 feet (58 m) high and has a structural volume of cubic yards (0 cubic metres).

Slurry #1 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 16,500 acre-ft (20,352 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is square miles (0 square kilometres).

Slurry #1 Dam Spillway

According to the latest available data, the Slurry #1 Dam does not have any spillways.

Slurry #1 Dam Compared to Four Famous American Dams

Slurry #1 Dam
Meigs, Ohio
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 190 730 550 357 216
Length (Ft) 2,300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 16,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Slurry #1 Dam Weather

Current Conditions at Slurry #1 Dam

Failed to fetch current weather data.

7-Day Forecast for Slurry #1 Dam

Failed to fetch weather forecast data.

Slurry #1 Dam Frequently Asked Questions

In which state is the Slurry #1 Dam?

Slurry #1 Dam is in Ohio.

In which county is the Slurry #1 Dam?

Slurry #1 Dam is in Meigs County.

How high is the Slurry #1 Dam?

Slurry #1 Dam is 190 feet high.

How long is the Slurry #1 Dam?

Slurry #1 Dam is 2,300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG