Taylorsville Dam, Ohio, USA

Quick Facts About Taylorsville Dam

Location: Montgomery, Ohio
Coordinates: 39.874444, -84.1619444
River: Great Miami River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1922
Dam Height: 78 ft (24 m)
Dam Length: 2,980 ft (908 m)
Dam Capacity: 386,000 acre-ft (476,123 Ml)

Taylorsville Dam Map

Here is a map of Taylorsville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Taylorsville Dam Information

Taylorsville Dam is an earthen embankment dam located about 0.6 miles from Taylorsville, Montgomery, Ohio.

The dam, which is on the Great Miami River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by MIAMI CONSERVANCY DISTRICT and commissioned in 1922 and is currently owned by The Miami Conservancy District.

Taylorsville Dam Structure

The Taylorsville Dam is approximately 2,980 feet (908 m) long, 78 feet (24 m) high and has a structural volume of 1,235,000 cubic yards (944,225 cubic metres).

Taylorsville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 386,000 acre-ft (476,123 Ml).

The surface area of the reservoir is 0 acres (0 ha) and the total catchment area is 725,120 square miles (1,878,054 square kilometres).

Taylorsville Dam Spillway

The dam spillway has a maximum discharge capacity of 112381 cubic feet per second (3182 cubic metres per second).

Taylorsville Dam Compared to Four Famous American Dams

Taylorsville Dam
Montgomery, Ohio
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 78 730 550 357 216
Length (Ft) 2,980 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 386,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 725,120 167,800 74,100 3,611 108,355

Taylorsville Dam Weather

Current Conditions at Taylorsville Dam

Failed to fetch current weather data.

7-Day Forecast for Taylorsville Dam

Failed to fetch weather forecast data.

Taylorsville Dam Frequently Asked Questions

In which state is the Taylorsville Dam?

Taylorsville Dam is in Ohio.

In which county is the Taylorsville Dam?

Taylorsville Dam is in Montgomery County.

How high is the Taylorsville Dam?

Taylorsville Dam is 78 feet high.

How long is the Taylorsville Dam?

Taylorsville Dam is 2,980 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG