Jim Hall Lake Dam, Oklahoma, USA

Home / USA / Oklahoma / Jim Hall Lake Dam

Quick Facts About Jim Hall Lake Dam

Location: Okmulgee, Oklahoma
Coordinates: 35.417848, -95.921735
River: Wolf Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1928
Dam Height: 49 ft (15 m)
Dam Length: 2,400 ft (732 m)
Dam Capacity: 11,550 acre-ft (14,247 Ml)

Jim Hall Lake Dam Map

Here is a map of Jim Hall Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Jim Hall Lake Dam Information

Jim Hall Lake Dam is an earthen embankment dam located about 2 miles from Four Corners, Okmulgee, Oklahoma.

The dam, which is on the Wolf Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by NA and commissioned in 1928 and is currently owned by CITY OF HENRYETTA.

Jim Hall Lake Dam Structure

The Jim Hall Lake Dam is approximately 2,400 feet (732 m) long, 49 feet (15 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Jim Hall Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,660 acre-ft (8,215 Ml) and maximum capacity of 11,550 acre-ft (14,247 Ml).

The surface area of the reservoir is 525 acres (212 ha) and the total catchment area is 20 square miles (53 square kilometres).

Jim Hall Lake Dam Spillway

The dam has a 4 feet (1 m) wide controlled spillway with a maximum discharge capacity of 26600 cubic feet per second (753 cubic metres per second).

Jim Hall Lake Dam Compared to Four Famous American Dams

Jim Hall Lake Dam
Okmulgee, Oklahoma
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 49 730 550 357 216
Length (Ft) 2,400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,550 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20 167,800 74,100 3,611 108,355

Jim Hall Lake Dam Weather

Current Conditions at Jim Hall Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Jim Hall Lake Dam

Failed to fetch weather forecast data.

Jim Hall Lake Dam Frequently Asked Questions

In which state is the Jim Hall Lake Dam?

Jim Hall Lake Dam is in Oklahoma.

In which county is the Jim Hall Lake Dam?

Jim Hall Lake Dam is in Okmulgee County.

How high is the Jim Hall Lake Dam?

Jim Hall Lake Dam is 49 feet high.

How long is the Jim Hall Lake Dam?

Jim Hall Lake Dam is 2,400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG