Pauls Valley Dam, Oklahoma, USA

Home / USA / Oklahoma / Pauls Valley Dam

Quick Facts About Pauls Valley Dam

Location: Garvin, Oklahoma
Coordinates: 34.768663, -97.204509
River: Washington Cr River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1954
Dam Height: 54 ft (16 m)
Dam Length: 2,600 ft (792 m)
Dam Capacity: 12,700 acre-ft (15,665 Ml)

Pauls Valley Dam Map

Here is a map of Pauls Valley Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Pauls Valley Dam Information

Pauls Valley Dam is an earthen embankment dam located in Wynnewood, Garvin, Oklahoma.

The dam, which is on the Washington Cr River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by N/A and commissioned in 1954 and is currently owned by PAULS VALLEY CITY.

Pauls Valley Dam Structure

The Pauls Valley Dam is approximately 2,600 feet (792 m) long, 54 feet (16 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Pauls Valley Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,730 acre-ft (10,768 Ml) and maximum capacity of 12,700 acre-ft (15,665 Ml).

The surface area of the reservoir is 750 acres (304 ha) and the total catchment area is 23 square miles (60 square kilometres).

Pauls Valley Dam Spillway

The dam has a 4 feet (1 m) wide controlled spillway with a maximum discharge capacity of 27600 cubic feet per second (782 cubic metres per second).

Pauls Valley Dam Compared to Four Famous American Dams

Pauls Valley Dam
Garvin, Oklahoma
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 54 730 550 357 216
Length (Ft) 2,600 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,700 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 23 167,800 74,100 3,611 108,355

Pauls Valley Dam Weather

Current Conditions at Pauls Valley Dam

Failed to fetch current weather data.

7-Day Forecast for Pauls Valley Dam

Failed to fetch weather forecast data.

Pauls Valley Dam Frequently Asked Questions

In which state is the Pauls Valley Dam?

Pauls Valley Dam is in Oklahoma.

In which county is the Pauls Valley Dam?

Pauls Valley Dam is in Garvin County.

How high is the Pauls Valley Dam?

Pauls Valley Dam is 54 feet high.

How long is the Pauls Valley Dam?

Pauls Valley Dam is 2,600 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG