SCS-Cherokee Sandy Site-17 Dam, Oklahoma, USA

Home / USA / Oklahoma / SCS-Cherokee Sandy Site-17 Dam

Quick Facts About SCS-Cherokee Sandy Site-17 Dam

Location: Garvin, Oklahoma
Coordinates: 34.745959, -97.059502
River: Cherokee Sandy Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1989
Dam Height: 54 ft (16 m)
Dam Length: 5,400 ft (1,646 m)
Dam Capacity: 26,300 acre-ft (32,441 Ml)
Hazard Potential: Significant

SCS-Cherokee Sandy Site-17 Dam Map

Here is a map of SCS-Cherokee Sandy Site-17 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

SCS-Cherokee Sandy Site-17 Dam Information

SCS-Cherokee Sandy Site-17 Dam is an earthen embankment dam located in Garvin County, Oklahoma.

The dam, which is on the Cherokee Sandy Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 1989 and is currently owned by GARVIN CO CONS DIST.

SCS-Cherokee Sandy Site-17 Dam Structure

The SCS-Cherokee Sandy Site-17 Dam is approximately 5,400 feet (1,646 m) long, 54 feet (16 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

SCS-Cherokee Sandy Site-17 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 14,424 acre-ft (17,792 Ml) and maximum capacity of 26,300 acre-ft (32,441 Ml).

The surface area of the reservoir is 745 acres (301 ha) and the total catchment area is 29 square miles (74 square kilometres).

SCS-Cherokee Sandy Site-17 Dam Spillway

The dam has a 4 feet (1 m) wide controlled spillway with a maximum discharge capacity of 11132 cubic feet per second (315 cubic metres per second).

SCS-Cherokee Sandy Site-17 Dam Compared to Four Famous American Dams

SCS-Cherokee Sandy Site-17 Dam
Garvin, Oklahoma
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 54 730 550 357 216
Length (Ft) 5,400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 26,300 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 29 167,800 74,100 3,611 108,355

SCS-Cherokee Sandy Site-17 Dam Weather

Current Conditions at SCS-Cherokee Sandy Site-17 Dam

Failed to fetch current weather data.

7-Day Forecast for SCS-Cherokee Sandy Site-17 Dam

Failed to fetch weather forecast data.

SCS-Cherokee Sandy Site-17 Dam Frequently Asked Questions

In which state is the SCS-Cherokee Sandy Site-17 Dam?

SCS-Cherokee Sandy Site-17 Dam is in Oklahoma.

In which county is the SCS-Cherokee Sandy Site-17 Dam?

SCS-Cherokee Sandy Site-17 Dam is in Garvin County.

How high is the SCS-Cherokee Sandy Site-17 Dam?

SCS-Cherokee Sandy Site-17 Dam is 54 feet high.

How long is the SCS-Cherokee Sandy Site-17 Dam?

SCS-Cherokee Sandy Site-17 Dam is 5,400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG