Antelope Dam

Antelope Dam Quick Facts

Location: Malheur, Oregon
Coordinates: 42.90654, -117.236954
River: Jack, Antelope, & Jordan Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1923
Dam Height: 56 ft (17 m)
Dam Length: 850 ft (259 m)
Dam Capacity: acre-ft (0 Ml)
Condition Assessment: Satisfactory
Share Antelope Dam:

Antelope Dam Map

Antelope Dam Information

Antelope Dam is an earthen embankment dam located about 6 miles from Danner, Malheur, Oregon.

The dam, which is on the Jack, Antelope, & Jordan Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1923 and is currently owned by JORDAN VALLEY IRRIGATION DISTRICT.

Antelope Dam Structure

The Antelope Dam is approximately 850 feet (259 m) long, 56 feet (17 m) high and has a structural volume of 100 cubic yards (76 cubic metres).

Antelope Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 70,000 acre-ft (86,344 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 2,731 acres (1,105 ha) and the total catchment area is 53 square miles (136 square kilometres).

Antelope Dam Spillway

The dam spillway has a maximum discharge capacity of 440 cubic feet per second (12 cubic metres per second).

Antelope Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Antelope Dam
Malheur, Oregon
Height (ft)
56
Length (Ft)
850
Storage Volume (acre-ft)
Drainage Area (sq miles)
53
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Antelope Dam Weather

Current Conditions at Antelope Dam

Failed to fetch current weather data.

7-Day Forecast for Antelope Dam

Failed to fetch weather forecast data.

Antelope Dam Frequently Asked Questions

In which state is the Antelope Dam?

Antelope Dam is in Oregon.

In which county is the Antelope Dam?

Antelope Dam is in Malheur County.

How high is the Antelope Dam?

Antelope Dam is 56 feet high.

How long is the Antelope Dam?

Antelope Dam is 850 feet long.

Share Antelope Dam:

More Dams in Malheur County:

Agency Valley Dam
Antelope Dam
Bully Creek Dam
Owyhee Dam
Warm Springs Dam
Willow Creek 3 (Malheur) Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG