Arthur R. Bowman Dam, Oregon, USA

Home / USA / Oregon / Arthur R. Bowman Dam

Quick Facts About Arthur R. Bowman Dam

Location: Crook, Oregon
Coordinates: 44.1112, -120.7867
River: Crooked River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1960
Dam Height: 245 ft (75 m)
Dam Length: 800 ft (244 m)
Dam Capacity: 255,708 acre-ft (315,411 Ml)
Condition Assessment: Not Available

Arthur R. Bowman Dam Map

Here is a map of Arthur R. Bowman Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Arthur R. Bowman Dam Information

Arthur R. Bowman Dam is an earthen embankment dam located about 21 miles from Prineville, Crook, Oregon.

The dam, which is on the Crooked River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation benefits.

The dam was designed by US Bureau of Reclamation and commissioned in 1960 and is currently owned by US Bureau of Reclamation.

Arthur R. Bowman Dam Structure

The Arthur R. Bowman Dam is approximately 800 feet (244 m) long, 245 feet (75 m) high and has a structural volume of 1,424,000 cubic yards (1,088,726 cubic metres).

Arthur R. Bowman Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 150,216 acre-ft (185,288 Ml) and maximum capacity of 255,708 acre-ft (315,411 Ml).

The surface area of the reservoir is 3,028 acres (1,225 ha) and the total catchment area is 2,635 square miles (6,825 square kilometres).

Arthur R. Bowman Dam Spillway

The dam has a 20 feet (6 m) wide uncontrolled spillway with a maximum discharge capacity of 8120 cubic feet per second (230 cubic metres per second).

Arthur R. Bowman Dam Compared to Four Famous American Dams

Arthur R. Bowman Dam
Crook, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 245 730 550 357 216
Length (Ft) 800 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 255,708 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 2,635 167,800 74,100 3,611 108,355

Arthur R. Bowman Dam Weather

Current Conditions at Arthur R. Bowman Dam

Failed to fetch current weather data.

7-Day Forecast for Arthur R. Bowman Dam

Failed to fetch weather forecast data.

Arthur R. Bowman Dam Frequently Asked Questions

In which state is the Arthur R. Bowman Dam?

Arthur R. Bowman Dam is in Oregon.

In which county is the Arthur R. Bowman Dam?

Arthur R. Bowman Dam is in Crook County.

How high is the Arthur R. Bowman Dam?

Arthur R. Bowman Dam is 245 feet high.

How long is the Arthur R. Bowman Dam?

Arthur R. Bowman Dam is 800 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG