Hills Creek Dam

Hills Creek Dam Quick Facts

Location: Lane, Oregon
Coordinates: 43.708723, -122.423634
River: Middle Fork Willamette River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1962
Dam Height: 328 ft (100 m)
Dam Length: 2,235 ft (681 m)
Dam Capacity: 356,000 acre-ft (439,119 Ml)
Condition Assessment: Not Available
Share Hills Creek Dam:

Hills Creek Dam Map

Hills Creek Dam Information

Hills Creek Dam is an earthen embankment dam located in Oakridge, Lane, Oregon.

The dam, which is on the Middle Fork Willamette River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation, Navigation, Recreation and Hydroelectric benefits.

The dam was designed by CENWP and commissioned in 1962 and is currently owned by USACE – Portland District.

Hills Creek Dam Structure

The Hills Creek Dam is approximately 2,235 feet (681 m) long, 328 feet (100 m) high and has a structural volume of 10,800,000 cubic yards (8,257,194 cubic metres).

Hills Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 350,600 acre-ft (432,458 Ml) and maximum capacity of 356,000 acre-ft (439,119 Ml).

The surface area of the reservoir is 2,735 acres (1,107 ha) and the total catchment area is 389 square miles (1,008 square kilometres).

Hills Creek Dam Spillway

The dam has a 146 feet (45 m) wide controlled spillway with a maximum discharge capacity of 141600 cubic feet per second (4010 cubic metres per second).

Hills Creek Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Hills Creek Dam
Lane, Oregon
Height (ft)
328
Length (Ft)
2,235
Storage Volume (acre-ft)
356,000
Drainage Area (sq miles)
389
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Hills Creek Dam Weather

Current Conditions at Hills Creek Dam

Failed to fetch current weather data.

7-Day Forecast for Hills Creek Dam

Failed to fetch weather forecast data.

Hills Creek Dam Frequently Asked Questions

In which state is the Hills Creek Dam?

Hills Creek Dam is in Oregon.

In which county is the Hills Creek Dam?

Hills Creek Dam is in Lane County.

How high is the Hills Creek Dam?

Hills Creek Dam is 328 feet high.

How long is the Hills Creek Dam?

Hills Creek Dam is 2,235 feet long.

Share Hills Creek Dam:

More Dams in Lane County:

Blue River Dam
Cottage Grove Dam
Cougar Dam
Dexter Dam
Dorena Dam
Fall Creek Dam
Fern Ridge Dam
Frd No 51 Dam
Hills Creek Dam
Lookout Point Dam
Siltcoos Lake Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG