Keno Dam, Oregon, USA

Home / USA / Oregon / Keno Dam

Quick Facts About Keno Dam

Location: Klamath, Oregon
Coordinates: 42.1347, -121.9475
River: Klamath River
Primary Purpose: Hydroelectric
Type: Gravity Earth
Commissioned: 1967
Dam Height: 41 ft (12 m)
Dam Length: 723 ft (220 m)
Dam Capacity: 18,500 acre-ft (22,819 Ml)
Condition Assessment: Satisfactory

Keno Dam Map

Here is a map of Keno Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Keno Dam Information

Keno Dam is a gravity earth dam located in None, Klamath, Oregon.

The dam, which is on the Klamath River, was primarily built for Hydroelectric purposes, but also serves for Other benefits.

The dam was designed by Bechtel Corporation and commissioned in 1967 and is currently owned by PacifiCorp.

Keno Dam Structure

The Keno Dam is approximately 723 feet (220 m) long, 41 feet (12 m) high and has a structural volume of cubic yards (0 cubic metres).

Keno Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 18,500 acre-ft (22,819 Ml) and maximum capacity of 18,500 acre-ft (22,819 Ml).

The surface area of the reservoir is 1,860 acres (753 ha) and the total catchment area is 3,920 square miles (10,153 square kilometres).

Keno Dam Spillway

The dam has a 265 feet (81 m) wide controlled spillway with a maximum discharge capacity of 25000 cubic feet per second (708 cubic metres per second).

Keno Dam Compared to Four Famous American Dams

Keno Dam
Klamath, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 41 730 550 357 216
Length (Ft) 723 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 18,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 3,920 167,800 74,100 3,611 108,355

Keno Dam Weather

Current Conditions at Keno Dam

Failed to fetch current weather data.

7-Day Forecast for Keno Dam

Failed to fetch weather forecast data.

Keno Dam Frequently Asked Questions

In which state is the Keno Dam?

Keno Dam is in Oregon.

In which county is the Keno Dam?

Keno Dam is in Klamath County.

How high is the Keno Dam?

Keno Dam is 41 feet high.

How long is the Keno Dam?

Keno Dam is 723 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG