Pelton Dam, Oregon, USA

Home / USA / Oregon / Pelton Dam

Quick Facts About Pelton Dam

Location: Jefferson, Oregon
Coordinates: 44.694133, -121.231127
River: Deschutes River
Primary Purpose: Hydroelectric
Type: Arch
Commissioned: 1957
Dam Height: 204 ft (62 m)
Dam Length: 776 ft (237 m)
Dam Capacity: 31,800 acre-ft (39,225 Ml)
Condition Assessment: Satisfactory

Pelton Dam Map

Here is a map of Pelton Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Pelton Dam Information

Pelton Dam is an arch dam located about 6 miles from Warm Springs, Or, Jefferson, Oregon.

The dam, which is on the Deschutes River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1957 and is currently owned by Portland General Electric Company.

Pelton Dam Structure

The Pelton Dam is approximately 776 feet (237 m) long, 204 feet (62 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Pelton Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 31,800 acre-ft (39,225 Ml) and maximum capacity of 31,800 acre-ft (39,225 Ml).

The surface area of the reservoir is 540 acres (219 ha) and the total catchment area is 7,800 square miles (20,202 square kilometres).

Pelton Dam Spillway

The dam spillway has a maximum discharge capacity of 23500 cubic feet per second (665 cubic metres per second).

Pelton Dam Compared to Four Famous American Dams

Pelton Dam
Jefferson, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 204 730 550 357 216
Length (Ft) 776 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 31,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 7,800 167,800 74,100 3,611 108,355

Pelton Dam Weather

Current Conditions at Pelton Dam

Failed to fetch current weather data.

7-Day Forecast for Pelton Dam

Failed to fetch weather forecast data.

Pelton Dam Frequently Asked Questions

In which state is the Pelton Dam?

Pelton Dam is in Oregon.

In which county is the Pelton Dam?

Pelton Dam is in Jefferson County.

How high is the Pelton Dam?

Pelton Dam is 204 feet high.

How long is the Pelton Dam?

Pelton Dam is 776 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG