Rock Creek-Upper (Harney) Dam, Oregon, USA

Home / USA / Oregon / Rock Creek-Upper (Harney) Dam

Quick Facts About Rock Creek-Upper (Harney) Dam

Location: Harney, Oregon
Coordinates: 42.68684, -119.306549
River: Rock Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1970
Dam Height: 45 ft (14 m)
Dam Length: 1,300 ft (396 m)
Dam Capacity: 6,900 acre-ft (8,511 Ml)

Rock Creek-Upper (Harney) Dam Map

Here is a map of Rock Creek-Upper (Harney) Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Rock Creek-Upper (Harney) Dam Information

Rock Creek-Upper (Harney) Dam is an earthen embankment dam located in No Downstream Settlement, Harney, Oregon.

The dam, which is on the Rock Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1970 and is currently owned by ROCK CREEK RANCH, INC..

Rock Creek-Upper (Harney) Dam Structure

The Rock Creek-Upper (Harney) Dam is approximately 1,300 feet (396 m) long, 45 feet (14 m) high and has a structural volume of 100 cubic yards (76 cubic metres).

Rock Creek-Upper (Harney) Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,818 acre-ft (7,176 Ml) and maximum capacity of 6,900 acre-ft (8,511 Ml).

The surface area of the reservoir is 384 acres (155 ha) and the total catchment area is 4 square miles (9 square kilometres).

Rock Creek-Upper (Harney) Dam Spillway

The dam spillway has a maximum discharge capacity of 1356 cubic feet per second (38 cubic metres per second).

Rock Creek-Upper (Harney) Dam Compared to Four Famous American Dams

Rock Creek-Upper (Harney) Dam
Harney, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 45 730 550 357 216
Length (Ft) 1,300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,900 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Rock Creek-Upper (Harney) Dam Weather

Current Conditions at Rock Creek-Upper (Harney) Dam

Failed to fetch current weather data.

7-Day Forecast for Rock Creek-Upper (Harney) Dam

Failed to fetch weather forecast data.

Rock Creek-Upper (Harney) Dam Frequently Asked Questions

In which state is the Rock Creek-Upper (Harney) Dam?

Rock Creek-Upper (Harney) Dam is in Oregon.

In which county is the Rock Creek-Upper (Harney) Dam?

Rock Creek-Upper (Harney) Dam is in Harney County.

How high is the Rock Creek-Upper (Harney) Dam?

Rock Creek-Upper (Harney) Dam is 45 feet high.

How long is the Rock Creek-Upper (Harney) Dam?

Rock Creek-Upper (Harney) Dam is 1,300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG