Thief Valley Dam, Oregon, USA

Home / USA / Oregon / Thief Valley Dam

Quick Facts About Thief Valley Dam

Location: Union, Oregon
Coordinates: 45.0127, -117.781
River: Powder River
Primary Purpose: Irrigation
Type: Buttress Concrete Other
Commissioned: 1931
Dam Height: 66 ft (20 m)
Dam Length: 390 ft (119 m)
Dam Capacity: 20,495 acre-ft (25,280 Ml)
Condition Assessment: Not Available

Thief Valley Dam Map

Here is a map of Thief Valley Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Thief Valley Dam Information

Thief Valley Dam is a buttress concrete other dam located about 16 miles from Keating, Union, Oregon.

The dam, which is on the Powder River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by US Bureau of Reclamation and commissioned in 1931 and is currently owned by US Bureau of Reclamation.

Thief Valley Dam Structure

The Thief Valley Dam is approximately 390 feet (119 m) long, 66 feet (20 m) high and has a structural volume of 6,300 cubic yards (4,817 cubic metres).

Thief Valley Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 17,600 acre-ft (21,709 Ml) and maximum capacity of 20,495 acre-ft (25,280 Ml).

The surface area of the reservoir is 807 acres (327 ha) and the total catchment area is 914 square miles (2,367 square kilometres).

Thief Valley Dam Spillway

The dam spillway has a maximum discharge capacity of 34000 cubic feet per second (963 cubic metres per second).

Thief Valley Dam Compared to Four Famous American Dams

Thief Valley Dam
Union, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 66 730 550 357 216
Length (Ft) 390 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 20,495 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 914 167,800 74,100 3,611 108,355

Thief Valley Dam Weather

Current Conditions at Thief Valley Dam

Failed to fetch current weather data.

7-Day Forecast for Thief Valley Dam

Failed to fetch weather forecast data.

Thief Valley Dam Frequently Asked Questions

In which state is the Thief Valley Dam?

Thief Valley Dam is in Oregon.

In which county is the Thief Valley Dam?

Thief Valley Dam is in Union County.

How high is the Thief Valley Dam?

Thief Valley Dam is 66 feet high.

How long is the Thief Valley Dam?

Thief Valley Dam is 390 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG