Warm Springs Dam, Oregon, USA

Home / USA / Oregon / Warm Springs Dam

Quick Facts About Warm Springs Dam

Location: Malheur, Oregon
Coordinates: 43.5854, -118.2088
River: Middle Fork Malheur River
Primary Purpose: Irrigation
Type: Concrete Arch
Commissioned: 1918
Dam Height: 100 ft (30 m)
Dam Length: 469 ft (143 m)
Dam Capacity: 192,400 acre-ft (237,322 Ml)
Condition Assessment: Not Available

Warm Springs Dam Map

Here is a map of Warm Springs Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Warm Springs Dam Information

Warm Springs Dam is a concrete arch dam located about 23 miles from Juntura, Malheur, Oregon.

The dam, which is on the Middle Fork Malheur River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by US Bureau of Reclamation and commissioned in 1918 and is currently owned by RECLAMATION;WARM SPRINGS ID.

Warm Springs Dam Structure

The Warm Springs Dam is approximately 469 feet (143 m) long, 100 feet (30 m) high and has a structural volume of 19,500 cubic yards (14,909 cubic metres).

Warm Springs Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 192,400 acre-ft (237,322 Ml) and maximum capacity of 192,400 acre-ft (237,322 Ml).

The surface area of the reservoir is 4,600 acres (1,862 ha) and the total catchment area is 1,100 square miles (2,849 square kilometres).

Warm Springs Dam Spillway

The dam spillway has a maximum discharge capacity of 9800 cubic feet per second (278 cubic metres per second).

Warm Springs Dam Compared to Four Famous American Dams

Warm Springs Dam
Malheur, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 100 730 550 357 216
Length (Ft) 469 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 192,400 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,100 167,800 74,100 3,611 108,355

Warm Springs Dam Weather

Current Conditions at Warm Springs Dam

Failed to fetch current weather data.

7-Day Forecast for Warm Springs Dam

Failed to fetch weather forecast data.

Warm Springs Dam Frequently Asked Questions

In which state is the Warm Springs Dam?

Warm Springs Dam is in Oregon.

In which county is the Warm Springs Dam?

Warm Springs Dam is in Malheur County.

How high is the Warm Springs Dam?

Warm Springs Dam is 100 feet high.

How long is the Warm Springs Dam?

Warm Springs Dam is 469 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG