Willamette Falls Dam, Oregon, USA

Home / USA / Oregon / Willamette Falls Dam

Quick Facts About Willamette Falls Dam

Location: Clackamas, Oregon
Coordinates: 45.351598, -122.616942
River: Willamette River
Primary Purpose: Hydroelectric
Type: Gravity Concrete
Commissioned: 1923
Dam Height: 20 ft (6 m)
Dam Length: 2,950 ft (899 m)
Dam Capacity: 17,000 acre-ft (20,969 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Willamette Falls Dam Map

Here is a map of Willamette Falls Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Willamette Falls Dam Information

Willamette Falls Dam is a gravity concrete dam located about 1 miles from Oregon City, Or, Clackamas, Oregon.

The dam, which is on the Willamette River, was primarily built for Hydroelectric purposes, but also serves for Navigation benefits.

The dam was designed by and commissioned in 1923 and is currently owned by Portland General Electric Company.

Willamette Falls Dam Structure

The Willamette Falls Dam is approximately 2,950 feet (899 m) long, 20 feet (6 m) high and has a structural volume of cubic yards (0 cubic metres).

Willamette Falls Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 17,000 acre-ft (20,969 Ml) and maximum capacity of 17,000 acre-ft (20,969 Ml).

The surface area of the reservoir is 1,532 acres (620 ha) and the total catchment area is 10,000 square miles (25,900 square kilometres).

Willamette Falls Dam Spillway

The dam has a 2950 feet (899 m) wide uncontrolled spillway with a maximum discharge capacity of 400000 cubic feet per second (11327 cubic metres per second).

Willamette Falls Dam Compared to Four Famous American Dams

Willamette Falls Dam
Clackamas, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 20 730 550 357 216
Length (Ft) 2,950 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 17,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 10,000 167,800 74,100 3,611 108,355

Willamette Falls Dam Weather

Current Conditions at Willamette Falls Dam

Failed to fetch current weather data.

7-Day Forecast for Willamette Falls Dam

Failed to fetch weather forecast data.

Willamette Falls Dam Frequently Asked Questions

In which state is the Willamette Falls Dam?

Willamette Falls Dam is in Oregon.

In which county is the Willamette Falls Dam?

Willamette Falls Dam is in Clackamas County.

How high is the Willamette Falls Dam?

Willamette Falls Dam is 20 feet high.

How long is the Willamette Falls Dam?

Willamette Falls Dam is 2,950 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG