Beaver Run Dam, Pennsylvania, USA

Home / USA / Pennsylvania / Beaver Run Dam

Quick Facts About Beaver Run Dam

Location: Westmoreland, Pennsylvania
Coordinates: 40.513333, -79.555
River: Beaver Run River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1952
Dam Height: 92 ft (28 m)
Dam Length: 1,095 ft (334 m)
Dam Capacity: 74,000 acre-ft (91,278 Ml)
Condition Assessment: Satisfactory

Beaver Run Dam Map

Here is a map of Beaver Run Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Beaver Run Dam Information

Beaver Run Dam is an earthen embankment dam located in Westmoreland County, Pennsylvania.

The dam, which is on the Beaver Run River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1952 and is currently owned by MUNICIPAL AUTHORITY OF WESTMORELAND COUNTY.

Beaver Run Dam Structure

The Beaver Run Dam is approximately 1,095 feet (334 m) long, 92 feet (28 m) high and has a structural volume of cubic yards (0 cubic metres).

Beaver Run Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 34,000 acre-ft (41,938 Ml) and maximum capacity of 74,000 acre-ft (91,278 Ml).

The surface area of the reservoir is 1,250 acres (506 ha) and the total catchment area is 43 square miles (112 square kilometres).

Beaver Run Dam Spillway

According to the latest available data, the Beaver Run Dam does not have any spillways.

Beaver Run Dam Compared to Four Famous American Dams

Beaver Run Dam
Westmoreland, Pennsylvania
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 92 730 550 357 216
Length (Ft) 1,095 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 74,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 43 167,800 74,100 3,611 108,355

Beaver Run Dam Weather

Current Conditions at Beaver Run Dam

Failed to fetch current weather data.

7-Day Forecast for Beaver Run Dam

Failed to fetch weather forecast data.

Beaver Run Dam Frequently Asked Questions

In which state is the Beaver Run Dam?

Beaver Run Dam is in Pennsylvania.

In which county is the Beaver Run Dam?

Beaver Run Dam is in Westmoreland County.

How high is the Beaver Run Dam?

Beaver Run Dam is 92 feet high.

How long is the Beaver Run Dam?

Beaver Run Dam is 1,095 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG