Mitchell Dam, South Dakota, USA

Home / USA / South Dakota / Mitchell Dam

Quick Facts About Mitchell Dam

Location: Davison, South Dakota
Coordinates: 43.738124, -98.0259012
River: Tr-Missouri River
Primary Purpose:
Type: Earth
Commissioned: 1928
Dam Height: 55 ft (17 m)
Dam Length: 1,320 ft (402 m)
Dam Capacity: 19,585 acre-ft (24,158 Ml)

Mitchell Dam Map

Here is a map of Mitchell Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mitchell Dam Information

Mitchell Dam is an earthen embankment dam located in None, Davison, South Dakota.

The dam, which is on the Tr-Missouri River, was primarily built for purposes, but also serves for benefits.

The dam was designed by and commissioned in 1928 and is currently owned by CITY OF MITCHELL.

Mitchell Dam Structure

The Mitchell Dam is approximately 1,320 feet (402 m) long, 55 feet (17 m) high and has a structural volume of 180,000 cubic yards (137,620 cubic metres).

Mitchell Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,960 acre-ft (11,052 Ml) and maximum capacity of 19,585 acre-ft (24,158 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 496 square miles (1,285 square kilometres).

Mitchell Dam Spillway

The dam has a 335 feet (102 m) wide uncontrolled spillway with a maximum discharge capacity of 53100 cubic feet per second (1504 cubic metres per second).

Mitchell Dam Compared to Four Famous American Dams

Mitchell Dam
Davison, South Dakota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 55 730 550 357 216
Length (Ft) 1,320 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 19,585 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 496 167,800 74,100 3,611 108,355

Mitchell Dam Weather

Current Conditions at Mitchell Dam

Failed to fetch current weather data.

7-Day Forecast for Mitchell Dam

Failed to fetch weather forecast data.

Mitchell Dam Frequently Asked Questions

In which state is the Mitchell Dam?

Mitchell Dam is in South Dakota.

In which county is the Mitchell Dam?

Mitchell Dam is in Davison County.

How high is the Mitchell Dam?

Mitchell Dam is 55 feet high.

How long is the Mitchell Dam?

Mitchell Dam is 1,320 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG