Boone Dam, Tennessee, USA

Home / USA / Tennessee / Boone Dam

Quick Facts About Boone Dam

Location: Washington, Tennessee
Coordinates: 36.440241, -82.438111
River: South Fork Holston River
Primary Purpose: Flood Risk Reduction
Type: Concrete Earth Gravity
Commissioned: 1952
Dam Height: 160 ft (49 m)
Dam Length: 1,532 ft (467 m)
Dam Capacity: 216,147 acre-ft (266,613 Ml)
Condition Assessment: Not Available

Boone Dam Map

Here is a map of Boone Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Boone Dam Information

Boone Dam is a concrete earth gravity dam located about 10 miles from Kingsport, Washington, Tennessee.

The dam, which is on the South Fork Holston River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation, Hydroelectric and Water Supply benefits.

The dam was designed by TVA and commissioned in 1952 and is currently owned by TVA.

Boone Dam Structure

The Boone Dam is approximately 1,532 feet (467 m) long, 160 feet (49 m) high and has a structural volume of 775,738 cubic yards (593,094 cubic metres).

Boone Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 180,453 acre-ft (222,585 Ml) and maximum capacity of 216,147 acre-ft (266,613 Ml).

The surface area of the reservoir is 4,130 acres (1,671 ha) and the total catchment area is 1,840 square miles (4,766 square kilometres).

Boone Dam Spillway

The dam has a 175 feet (53 m) wide controlled spillway with a maximum discharge capacity of 168000 cubic feet per second (4757 cubic metres per second).

Boone Dam Compared to Four Famous American Dams

Boone Dam
Washington, Tennessee
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 160 730 550 357 216
Length (Ft) 1,532 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 216,147 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,840 167,800 74,100 3,611 108,355

Boone Dam Weather

Current Conditions at Boone Dam

Failed to fetch current weather data.

7-Day Forecast for Boone Dam

Failed to fetch weather forecast data.

Boone Dam Frequently Asked Questions

In which state is the Boone Dam?

Boone Dam is in Tennessee.

In which county is the Boone Dam?

Boone Dam is in Washington County.

How high is the Boone Dam?

Boone Dam is 160 feet high.

How long is the Boone Dam?

Boone Dam is 1,532 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG