Quick Facts About Great Falls Dam
Great Falls Dam Map
Great Falls Dam Information
Great Falls Dam is a concrete gravity dam located about 92 miles from Carthage, White, Tennessee.
The dam, which is on the Caney Fork River, was primarily built for Hydroelectric purposes, but also serves for benefits.
The dam was designed by TN ELECTRIC POWER and commissioned in 1916 and is currently owned by TVA.
Great Falls Dam Structure
The Great Falls Dam is approximately 800 feet (244 m) long, 82 feet (25 m) high and has a structural volume of 59,169 cubic yards (45,238 cubic metres).
Great Falls Dam Storage Capacity & Surface Area
The reservoir has a normal storage capacity of 39,660 acre-ft (48,920 Ml) and maximum capacity of 64,800 acre-ft (79,930 Ml).
The surface area of the reservoir is 1,830 acres (741 ha) and the total catchment area is 1,675 square miles (4,338 square kilometres).
Great Falls Dam Spillway
The dam has a 450 feet (137 m) wide controlled spillway with a maximum discharge capacity of 162500 cubic feet per second (4601 cubic metres per second).
Great Falls Dam Compared to Four Famous American Dams
Great Falls Dam White, Tennessee |
Hoover Dam Clark County, Nevada |
Grand Coulee Dam Okanogan County, Washington |
Theodore Roosevelt Dam Maricopa County, Arizona |
Glen Canyon Dam Coconino County, Arizona |
|
---|---|---|---|---|---|
Height (ft) | 82 | 730 | 550 | 357 | 216 |
Length (Ft) | 800 | 1,244 | 5,673 | 6,920 | 1,565 |
Storage Volume (acre-ft) | 64,800 | 30,237,000 | 9,562,000 | 3,540,000 | 29,875,000 |
Drainage Area (sq miles) | 1,675 | 167,800 | 74,100 | 3,611 | 108,355 |
Great Falls Dam Weather
Current Conditions at Great Falls Dam
Failed to fetch current weather data.7-Day Forecast for Great Falls Dam
Failed to fetch weather forecast data.Great Falls Dam Frequently Asked Questions
Great Falls Dam is in Tennessee.
Great Falls Dam is in White County.
Great Falls Dam is 82 feet high.
Great Falls Dam is 800 feet long.
More Dams in White County:
Des Arc Bayou Wid Site 3 DamGiroux Wash Tsf Dam
Great Falls Dam
Norton Dam
Norway Dam
Upper Sterling Dam
More Dams in Tennessee:
Beech DamBoone Dam
Calderwood Dam
Cherokee Dam
Chickamauga Dam
Chilhowee Dam
Dogwood Dam
Douglas Dam
Elk River Dam
Fort Loudoun Dam
Fort Patrick Henry Dam
Great Falls Dam
John Sevier Dam
Melton Hill Dam
Nickajack Dam
Nolichucky Dam
Normandy Dam
Norris Dam
Ocoee No. 1 Dam
Ocoee No. 3 Dam
Pickwick Landing Dam
Pin Oak Dam
Pine Dam
Raccoon Mountain Dam
South Holston Dam
Tellico Dam
Tims Ford Dam
Watauga Dam
Watts Bar Dam
Condition Assessment Classification
Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Source: National Inventory of Dams