Tims Ford Dam, Tennessee, USA

Home / USA / Tennessee / Tims Ford Dam

Quick Facts About Tims Ford Dam

Location: Franklin, Tennessee
Coordinates: 35.19684, -86.278551
River: Elk River
Primary Purpose: Flood Risk Reduction
Type: Rockfill
Commissioned: 1970
Dam Height: 163 ft (50 m)
Dam Length: 1,580 ft (482 m)
Dam Capacity: 824,312 acre-ft (1,016,772 Ml)
Condition Assessment: Not Available

Tims Ford Dam Map

Here is a map of Tims Ford Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Tims Ford Dam Information

Tims Ford Dam is a rockfill dam located about 43 miles from Fayetteville, Franklin, Tennessee.

The dam, which is on the Elk River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation, Hydroelectric and Water Supply benefits.

The dam was designed by TVA and commissioned in 1970 and is currently owned by TVA.

Tims Ford Dam Structure

The Tims Ford Dam is approximately 1,580 feet (482 m) long, 163 feet (50 m) high and has a structural volume of 2,305,800 cubic yards (1,762,911 cubic metres).

Tims Ford Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 529,983 acre-ft (653,723 Ml) and maximum capacity of 824,312 acre-ft (1,016,772 Ml).

The surface area of the reservoir is 10,500 acres (4,249 ha) and the total catchment area is 529 square miles (1,370 square kilometres).

Tims Ford Dam Spillway

The dam has a 144 feet (44 m) wide controlled spillway with a maximum discharge capacity of 140100 cubic feet per second (3967 cubic metres per second).

Tims Ford Dam Compared to Four Famous American Dams

Tims Ford Dam
Franklin, Tennessee
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 163 730 550 357 216
Length (Ft) 1,580 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 824,312 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 529 167,800 74,100 3,611 108,355

Tims Ford Dam Weather

Current Conditions at Tims Ford Dam

Failed to fetch current weather data.

7-Day Forecast for Tims Ford Dam

Failed to fetch weather forecast data.

Tims Ford Dam Frequently Asked Questions

In which state is the Tims Ford Dam?

Tims Ford Dam is in Tennessee.

In which county is the Tims Ford Dam?

Tims Ford Dam is in Franklin County.

How high is the Tims Ford Dam?

Tims Ford Dam is 163 feet high.

How long is the Tims Ford Dam?

Tims Ford Dam is 1,580 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG