Barney M Davis Cooling Reservoir Dam, Texas, USA

Home / USA / Texas / Barney M Davis Cooling Reservoir Dam

Quick Facts About Barney M Davis Cooling Reservoir Dam

Location: Nueces, Texas
Coordinates: 27.627271, -97.346999
River: Off Ch-Oso Creek River
Primary Purpose: Other
Type: Earth
Commissioned: 1973
Dam Height: 20 ft (6 m)
Dam Length: 33,000 ft (10,058 m)
Dam Capacity: 11,400 acre-ft (14,062 Ml)

Barney M Davis Cooling Reservoir Dam Map

Here is a map of Barney M Davis Cooling Reservoir Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Barney M Davis Cooling Reservoir Dam Information

Barney M Davis Cooling Reservoir Dam is an earthen embankment dam located in Nueces County, Texas.

The dam, which is on the Off Ch-Oso Creek River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by SARGENT & LUNDY and commissioned in 1973 and is currently owned by AEP TEXAS CENTRAL COMPANY.

Barney M Davis Cooling Reservoir Dam Structure

The Barney M Davis Cooling Reservoir Dam is approximately 33,000 feet (10,058 m) long, 20 feet (6 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Barney M Davis Cooling Reservoir Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,600 acre-ft (8,141 Ml) and maximum capacity of 11,400 acre-ft (14,062 Ml).

The surface area of the reservoir is 0 acres (0 ha) and the total catchment area is 0 square miles (0 square kilometres).

Barney M Davis Cooling Reservoir Dam Spillway

The dam has a 80 feet (24 m) wide controlled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Barney M Davis Cooling Reservoir Dam Compared to Four Famous American Dams

Barney M Davis Cooling Reservoir Dam
Nueces, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 20 730 550 357 216
Length (Ft) 33,000 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,400 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 0 167,800 74,100 3,611 108,355

Barney M Davis Cooling Reservoir Dam Weather

Current Conditions at Barney M Davis Cooling Reservoir Dam

Parameter Value
Current Time 20:56
Sunrise 06:33
Sunset 20:26
Temperature (°F) 84
Feels Like (°F) 97
Cloud Coverage (%) 20
Pressure (inHg) 1014
Humidity (%) 86
Wind Speed (mph) 15
Rain (mm) 0

7-Day Forecast for Barney M Davis Cooling Reservoir Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 80 91 104 1015 73 17 27 SSE 58 1 light rain
Sun 81 89 101 1016 65 16 23 SE 39 0 light rain
Mon 81 89 98 1015 62 18 23 SE 38 0 light rain
Tue 81 89 97 1013 63 24 28 SSE 0 - clear sky
Wed 81 87 95 1014 62 24 28 SSE 0 - clear sky
Thu 79 84 90 1018 66 23 27 ESE 100 21 moderate rain
Fri 80 87 94 1018 65 15 18 E 100 3 light rain
Sat 80 87 94 1017 65 15 17 SE 100 2 light rain

Barney M Davis Cooling Reservoir Dam Frequently Asked Questions

In which state is the Barney M Davis Cooling Reservoir Dam?

Barney M Davis Cooling Reservoir Dam is in Texas.

In which county is the Barney M Davis Cooling Reservoir Dam?

Barney M Davis Cooling Reservoir Dam is in Nueces County.

How high is the Barney M Davis Cooling Reservoir Dam?

Barney M Davis Cooling Reservoir Dam is 20 feet high.

How long is the Barney M Davis Cooling Reservoir Dam?

Barney M Davis Cooling Reservoir Dam is 33,000 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG