Benbrook Dam, Texas, USA

Home / USA / Texas / Benbrook Dam

Quick Facts About Benbrook Dam

Location: Tarrant, Texas
Coordinates: 32.653746, -97.4556303
River: Clear Fork Of Trinity River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1951
Dam Height: 130 ft (40 m)
Dam Length: 9,130 ft (2,783 m)
Dam Capacity: 410,000 acre-ft (505,727 Ml)
Condition Assessment: Not Available

Benbrook Dam Map

Here is a map of Benbrook Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Benbrook Dam Information

Benbrook Dam is an earthen embankment dam located in Fort Worth, Tarrant, Texas.

The dam, which is on the Clear Fork Of Trinity River, was primarily built for Flood Risk Reduction purposes, but also serves for Fish and Wildlife Pond, Recreation and Water Supply benefits.

The dam was designed by CESWF and commissioned in 1951 and is currently owned by USACE – Fort Worth District.

Benbrook Dam Structure

The Benbrook Dam is approximately 9,130 feet (2,783 m) long, 130 feet (40 m) high and has a structural volume of 5,275,000 cubic yards (4,033,028 cubic metres).

Benbrook Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 88,250 acre-ft (108,855 Ml) and maximum capacity of 410,000 acre-ft (505,727 Ml).

The surface area of the reservoir is 3,770 acres (1,526 ha) and the total catchment area is 429 square miles (1,111 square kilometres).

Benbrook Dam Spillway

The dam has a 500 feet (152 m) wide uncontrolled spillway with a maximum discharge capacity of 172000 cubic feet per second (4870 cubic metres per second).

Benbrook Dam Compared to Four Famous American Dams

Benbrook Dam
Tarrant, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 130 730 550 357 216
Length (Ft) 9,130 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 410,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 429 167,800 74,100 3,611 108,355

Benbrook Dam Weather

Current Conditions at Benbrook Dam

Failed to fetch current weather data.

7-Day Forecast for Benbrook Dam

Failed to fetch weather forecast data.

Benbrook Dam Frequently Asked Questions

In which state is the Benbrook Dam?

Benbrook Dam is in Texas.

In which county is the Benbrook Dam?

Benbrook Dam is in Tarrant County.

How high is the Benbrook Dam?

Benbrook Dam is 130 feet high.

How long is the Benbrook Dam?

Benbrook Dam is 9,130 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG