Big Creek Dam, Texas, USA

Home / USA / Texas / Big Creek Dam

Quick Facts About Big Creek Dam

Location: Delta, Texas
Coordinates: 33.392371, -95.69409
River: Big Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1987
Dam Height: 38 ft (12 m)
Dam Length: 4,350 ft (1,326 m)
Dam Capacity: 13,296 acre-ft (16,400 Ml)

Big Creek Dam Map

Here is a map of Big Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Big Creek Dam Information

Big Creek Dam is an earthen embankment dam located in Delta County, Texas.

The dam, which is on the Big Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by HAYTER ENGINEERING INC;HAYTER ENGINEERING INC;HAYTER ENGINEERING INC and commissioned in 1987 and is currently owned by CITY OF COOPER.

Big Creek Dam Structure

The Big Creek Dam is approximately 4,350 feet (1,326 m) long, 38 feet (12 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Big Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,625 acre-ft (5,705 Ml) and maximum capacity of 13,296 acre-ft (16,400 Ml).

The surface area of the reservoir is 513 acres (208 ha) and the total catchment area is 12 square miles (31 square kilometres).

Big Creek Dam Spillway

The dam has a 807 feet (246 m) wide uncontrolled spillway with a maximum discharge capacity of 34863 cubic feet per second (987 cubic metres per second).

Big Creek Dam Compared to Four Famous American Dams

Big Creek Dam
Delta, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 38 730 550 357 216
Length (Ft) 4,350 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,296 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 12 167,800 74,100 3,611 108,355

Big Creek Dam Weather

Current Conditions at Big Creek Dam

Parameter Value
Current Time 20:17
Sunrise 06:53
Sunset 19:55
Temperature (°F) 88
Feels Like (°F) 89
Cloud Coverage (%) 4
Pressure (inHg) 1014
Humidity (%) 42
Wind Speed (mph) 10
Rain (mm) 0

7-Day Forecast for Big Creek Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 77 99 104 1016 43 11 25 E 100 0 light rain
Fri 78 101 94 1016 24 10 19 NNE 0 - clear sky
Sat 79 107 98 1014 26 13 29 E 0 - clear sky
Sun 79 107 104 1013 23 14 30 SW 0 - clear sky
Mon 77 104 101 1015 26 12 30 SSW 0 - scattered clouds
Tue 77 104 102 1015 27 13 30 S 0 - clear sky
Wed 79 102 104 1015 26 14 31 SSW 0 - clear sky
Thu 78 105 103 1015 26 11 29 SSW 0 - clear sky

Big Creek Dam Frequently Asked Questions

In which state is the Big Creek Dam?

Big Creek Dam is in Texas.

In which county is the Big Creek Dam?

Big Creek Dam is in Delta County.

How high is the Big Creek Dam?

Big Creek Dam is 38 feet high.

How long is the Big Creek Dam?

Big Creek Dam is 4,350 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG