Blackburn Crossing Dam

Blackburn Crossing Dam Quick Facts

Location: Anderson;Cherokee, Texas
Coordinates: 32.057016, -95.43675
River: Neches River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1962
Dam Height: 75 ft (23 m)
Dam Length: 5,720 ft (1,743 m)
Dam Capacity: 1,045,000 acre-ft (1,288,987 Ml)
Share Blackburn Crossing Dam:

Blackburn Crossing Dam Map

Blackburn Crossing Dam Information

Blackburn Crossing Dam is an earthen embankment dam located about 13 miles from Neches, Anderson;Cherokee, Texas.

The dam, which is on the Neches River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by FORREST AND COTTON AND JONES & BOYD INC;FORREST AND COTTON AND JONES & BOYD INC;FORREST AND COTTON AND JONES & BOYD INC;HDR ENGINEERING and commissioned in 1962 and is currently owned by UPPER NECHES RIVER MWA.

Blackburn Crossing Dam Structure

The Blackburn Crossing Dam is approximately 5,720 feet (1,743 m) long, 75 feet (23 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Blackburn Crossing Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 373,204 acre-ft (460,340 Ml) and maximum capacity of 1,045,000 acre-ft (1,288,987 Ml).

The surface area of the reservoir is 25,560 acres (10,344 ha) and the total catchment area is 847 square miles (2,194 square kilometres).

Blackburn Crossing Dam Spillway

The dam has a 500 feet (152 m) wide uncontrolled spillway with a maximum discharge capacity of 187056 cubic feet per second (5297 cubic metres per second).

Blackburn Crossing Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Blackburn Crossing Dam
Anderson;Cherokee, Texas
Height (ft)
75
Length (Ft)
5,720
Storage Volume (acre-ft)
1,045,000
Drainage Area (sq miles)
847
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Blackburn Crossing Dam Weather

Current Conditions at Blackburn Crossing Dam

Failed to fetch current weather data.

7-Day Forecast for Blackburn Crossing Dam

Failed to fetch weather forecast data.

Blackburn Crossing Dam Frequently Asked Questions

In which state is the Blackburn Crossing Dam?

Blackburn Crossing Dam is in Texas.

In which county is the Blackburn Crossing Dam?

Blackburn Crossing Dam is in Anderson;Cherokee County.

How high is the Blackburn Crossing Dam?

Blackburn Crossing Dam is 75 feet high.

How long is the Blackburn Crossing Dam?

Blackburn Crossing Dam is 5,720 feet long.

Share Blackburn Crossing Dam:

More Dams in Anderson;Cherokee County:

Blackburn Crossing Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG