Elm Fork WS SCS Site 19mp Dam, Texas, USA

Quick Facts About Elm Fork WS SCS Site 19mp Dam

Location: Cooke, Texas

Coordinates: 33.659977, -97.400053

River: Brushy Elm Creek River

Primary Purpose: Flood Risk Reduction

Type: Earth

Commissioned: 2006

Dam Height: 77 ft (23 m)

Dam Length: 4,415 ft (1,346 m)

Dam Capacity: 19,439 acre-ft (23,978 Ml)

Hazard Potential: High

Condition Assessment: Not Rated

Elm Fork WS SCS Site 19mp Dam Map

Here is a map of Elm Fork WS SCS Site 19mp Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Elm Fork WS SCS Site 19mp Dam Information

Elm Fork WS SCS Site 19mp Dam is an earthen embankment dam located about 1 miles from Muenster, Cooke, Texas.

The dam, which is on the Brushy Elm Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by M & E CONSULTANTS and commissioned in 2006 and is currently owned by CITY OF MUENSTER;COOKE COUNTY;MUENSTER WATER DISTRICT;UPPER ELM RED SWCD.

Elm Fork WS SCS Site 19mp Dam Structure

The Elm Fork WS SCS Site 19mp Dam is approximately 4,415 feet (1,346 m) long, 77 feet (23 m) high and has a structural volume of 1,350,000 cubic yards (1,032,149 cubic metres).

Elm Fork WS SCS Site 19mp Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,499 acre-ft (5,549 Ml) and maximum capacity of 19,439 acre-ft (23,978 Ml).

The surface area of the reservoir is 309 acres (125 ha) and the total catchment area is 14 square miles (37 square kilometres).

Elm Fork WS SCS Site 19mp Dam Spillway

The dam has a 204 feet (62 m) wide uncontrolled spillway with a maximum discharge capacity of 23111 cubic feet per second (654 cubic metres per second).

Elm Fork WS SCS Site 19mp Dam Compared to Four Famous American Dams

	Elm Fork WS SCS Site 19mp Dam Cooke, Texas	Hoover Dam Clark County, Nevada	Grand Coulee Dam Okanogan County, Washington	Theodore Roosevelt Dam Maricopa County, Arizona	Glen Canyon Dam Coconino County, Arizona
Height (ft)	77	730	550	357	216
Length (Ft)	4,415	1,244	5,673	6,920	1,565
Storage Volume (acre-ft)	19,439	30,237,000	9,562,000	3,540,000	29,875,000
Drainage Area (sq miles)	14	167,800	74,100	3,611	108,355

Elm Fork WS SCS Site 19mp Dam Weather

Current Conditions at Elm Fork WS SCS Site 19mp Dam

Failed to fetch current weather data.

7-Day Forecast for Elm Fork WS SCS Site 19mp Dam

Failed to fetch weather forecast data.

Elm Fork WS SCS Site 19mp Dam Frequently Asked Questions

In which state is the Elm Fork WS SCS Site 19mp Dam?

Elm Fork WS SCS Site 19mp Dam is in Texas.

In which county is the Elm Fork WS SCS Site 19mp Dam?

Elm Fork WS SCS Site 19mp Dam is in Cooke County.

How high is the Elm Fork WS SCS Site 19mp Dam?

Elm Fork WS SCS Site 19mp Dam is 77 feet high.

How long is the Elm Fork WS SCS Site 19mp Dam?

Elm Fork WS SCS Site 19mp Dam is 4,415 feet long.

More Dams in Cooke County:

Clear Creek WS SCS Site 47 Dam
Coffee Mill Dam
Elm Fork WS SCS Site 19mp Dam
Fish Creek Dam
Lake Kiowa Dam

More Dams in Texas:

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams