Fort Parker State Park Lake Dam

Fort Parker State Park Lake Dam Quick Facts

Location: Limestone, Texas
Coordinates: 31.588617, -96.528052
River: Navasota River
Primary Purpose: Irrigation
Type: Gravity
Commissioned: 1939
Dam Height: 64 ft (20 m)
Dam Length: 1,283 ft (391 m)
Dam Capacity: 21,274 acre-ft (26,241 Ml)
Share Fort Parker State Park Lake Dam:

Fort Parker State Park Lake Dam Map

Fort Parker State Park Lake Dam Information

Fort Parker State Park Lake Dam is a gravity dam located in Limestone County, Texas.

The dam, which is on the Navasota River, was primarily built for Irrigation purposes, but also serves for Recreation benefits.

The dam was designed by NATL PKS BD-TEX PKS BD and commissioned in 1939 and is currently owned by TEXAS PARKS AND WILDLIFE DEPARTMENT.

Fort Parker State Park Lake Dam Structure

The Fort Parker State Park Lake Dam is approximately 1,283 feet (391 m) long, 64 feet (20 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Fort Parker State Park Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,100 acre-ft (3,824 Ml) and maximum capacity of 21,274 acre-ft (26,241 Ml).

The surface area of the reservoir is 700 acres (283 ha) and the total catchment area is 239 square miles (619 square kilometres).

Fort Parker State Park Lake Dam Spillway

The dam has a 503 feet (153 m) wide uncontrolled spillway with a maximum discharge capacity of 74657 cubic feet per second (2114 cubic metres per second).

Fort Parker State Park Lake Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Fort Parker State Park Lake Dam
Limestone, Texas
Height (ft)
64
Length (Ft)
1,283
Storage Volume (acre-ft)
21,274
Drainage Area (sq miles)
239
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Fort Parker State Park Lake Dam Weather

Current Conditions at Fort Parker State Park Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Fort Parker State Park Lake Dam

Failed to fetch weather forecast data.

Fort Parker State Park Lake Dam Frequently Asked Questions

In which state is the Fort Parker State Park Lake Dam?

Fort Parker State Park Lake Dam is in Texas.

In which county is the Fort Parker State Park Lake Dam?

Fort Parker State Park Lake Dam is in Limestone County.

How high is the Fort Parker State Park Lake Dam?

Fort Parker State Park Lake Dam is 64 feet high.

How long is the Fort Parker State Park Lake Dam?

Fort Parker State Park Lake Dam is 1,283 feet long.

Share Fort Parker State Park Lake Dam:

More Dams in Limestone County:

Bistone Dam
Fort Parker State Park Lake Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG