Fort Sherman Dam

Fort Sherman Dam Quick Facts

Location: Titus, Texas
Coordinates: 33.081372, -95.00261
River: Big Cypress Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1978
Dam Height: 69 ft (21 m)
Dam Length: 7,060 ft (2,152 m)
Dam Capacity: 306,093 acre-ft (377,560 Ml)
Condition Assessment: Satisfactory
Share Fort Sherman Dam:

Fort Sherman Dam Map

Fort Sherman Dam Information

Fort Sherman Dam is an earthen embankment dam located in Titus County, Texas.

The dam, which is on the Big Cypress Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by URS AND FORREST AND COTTON and commissioned in 1978 and is currently owned by TITUS COUNTY FWSD.

Fort Sherman Dam Structure

The Fort Sherman Dam is approximately 7,060 feet (2,152 m) long, 69 feet (21 m) high and has a structural volume of 428,095 cubic yards (327,302 cubic metres).

Fort Sherman Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 204,678 acre-ft (252,466 Ml) and maximum capacity of 306,093 acre-ft (377,560 Ml).

The surface area of the reservoir is 9,004 acres (3,644 ha) and the total catchment area is 239 square miles (619 square kilometres).

Fort Sherman Dam Spillway

The dam spillway has a maximum discharge capacity of 234603 cubic feet per second (6643 cubic metres per second).

Fort Sherman Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Fort Sherman Dam
Titus, Texas
Height (ft)
69
Length (Ft)
7,060
Storage Volume (acre-ft)
306,093
Drainage Area (sq miles)
239
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Fort Sherman Dam Weather

Current Conditions at Fort Sherman Dam

Failed to fetch current weather data.

7-Day Forecast for Fort Sherman Dam

Failed to fetch weather forecast data.

Fort Sherman Dam Frequently Asked Questions

In which state is the Fort Sherman Dam?

Fort Sherman Dam is in Texas.

In which county is the Fort Sherman Dam?

Fort Sherman Dam is in Titus County.

How high is the Fort Sherman Dam?

Fort Sherman Dam is 69 feet high.

How long is the Fort Sherman Dam?

Fort Sherman Dam is 7,060 feet long.

Share Fort Sherman Dam:

More Dams in Titus County:

Fort Sherman Dam
Monticello Dam
Swauano Creek Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG