Huntsville State Park Dam, Texas, USA

Home / USA / Texas / Huntsville State Park Dam

Quick Facts About Huntsville State Park Dam

Location: Walker, Texas
Coordinates: 30.608778, -95.533368
River: Prairie Branch River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1938
Dam Height: 35 ft (11 m)
Dam Length: 1,400 ft (427 m)
Dam Capacity: 7,103 acre-ft (8,762 Ml)

Huntsville State Park Dam Map

Here is a map of Huntsville State Park Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Huntsville State Park Dam Information

Huntsville State Park Dam is an earthen embankment dam located in Walker County, Texas.

The dam, which is on the Prairie Branch River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by DOI NPS;HALFF ASSOCIATES INC;UNKNOWN and commissioned in 1938 and is currently owned by TEXAS PARKS AND WILDLIFE DEPARTMENT.

Huntsville State Park Dam Structure

The Huntsville State Park Dam is approximately 1,400 feet (427 m) long, 35 feet (11 m) high and has a structural volume of 130,000 cubic yards (99,392 cubic metres).

Huntsville State Park Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,498 acre-ft (1,848 Ml) and maximum capacity of 7,103 acre-ft (8,762 Ml).

The surface area of the reservoir is 207 acres (84 ha) and the total catchment area is 15 square miles (38 square kilometres).

Huntsville State Park Dam Spillway

The dam has a 150 feet (46 m) wide uncontrolled spillway with a maximum discharge capacity of 28800 cubic feet per second (816 cubic metres per second).

Huntsville State Park Dam Compared to Four Famous American Dams

Huntsville State Park Dam
Walker, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 35 730 550 357 216
Length (Ft) 1,400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,103 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 15 167,800 74,100 3,611 108,355

Huntsville State Park Dam Weather

Current Conditions at Huntsville State Park Dam

Failed to fetch current weather data.

7-Day Forecast for Huntsville State Park Dam

Failed to fetch weather forecast data.

Huntsville State Park Dam Frequently Asked Questions

In which state is the Huntsville State Park Dam?

Huntsville State Park Dam is in Texas.

In which county is the Huntsville State Park Dam?

Huntsville State Park Dam is in Walker County.

How high is the Huntsville State Park Dam?

Huntsville State Park Dam is 35 feet high.

How long is the Huntsville State Park Dam?

Huntsville State Park Dam is 1,400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG