Joe Pool Dam, Texas, USA

Home / USA / Texas / Joe Pool Dam

Quick Facts About Joe Pool Dam

Location: Dallas, Texas
Coordinates: 32.64401, -96.9909592
River: Mountain Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1986
Dam Height: 108 ft (33 m)
Dam Length: 22,180 ft (6,760 m)
Dam Capacity: 642,500 acre-ft (792,511 Ml)
Condition Assessment: Not Available

Joe Pool Dam Map

Here is a map of Joe Pool Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Joe Pool Dam Information

Joe Pool Dam is an earthen embankment dam located in Dallas, Dallas, Texas.

The dam, which is on the Mountain Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Fish and Wildlife Pond, Recreation and Water Supply benefits.

The dam was designed by CESWF and commissioned in 1986 and is currently owned by USACE – Fort Worth District.

Joe Pool Dam Structure

The Joe Pool Dam is approximately 22,180 feet (6,760 m) long, 108 feet (33 m) high and has a structural volume of 12,700,000 cubic yards (9,709,849 cubic metres).

Joe Pool Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 176,900 acre-ft (218,203 Ml) and maximum capacity of 642,500 acre-ft (792,511 Ml).

The surface area of the reservoir is 7,470 acres (3,023 ha) and the total catchment area is 232 square miles (601 square kilometres).

Joe Pool Dam Spillway

The dam has a 50 feet (15 m) wide uncontrolled spillway with a maximum discharge capacity of 11900 cubic feet per second (337 cubic metres per second).

Joe Pool Dam Compared to Four Famous American Dams

Joe Pool Dam
Dallas, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 108 730 550 357 216
Length (Ft) 22,180 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 642,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 232 167,800 74,100 3,611 108,355

Joe Pool Dam Weather

Current Conditions at Joe Pool Dam

Failed to fetch current weather data.

7-Day Forecast for Joe Pool Dam

Failed to fetch weather forecast data.

Joe Pool Dam Frequently Asked Questions

In which state is the Joe Pool Dam?

Joe Pool Dam is in Texas.

In which county is the Joe Pool Dam?

Joe Pool Dam is in Dallas County.

How high is the Joe Pool Dam?

Joe Pool Dam is 108 feet high.

How long is the Joe Pool Dam?

Joe Pool Dam is 22,180 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG