John T Montford Dam, Texas, USA

Home / USA / Texas / John T Montford Dam

Quick Facts About John T Montford Dam

Location: Garza, Texas
Coordinates: 33.061526, -101.04209
River: Double Mountain Fork Brazos R River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1994
Dam Height: 141 ft (43 m)
Dam Length: 4,150 ft (1,265 m)
Dam Capacity: 354,500 acre-ft (437,269 Ml)

John T Montford Dam Map

Here is a map of John T Montford Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

John T Montford Dam Information

John T Montford Dam is an earthen embankment dam located in Garza County, Texas.

The dam, which is on the Double Mountain Fork Brazos R River, was primarily built for Irrigation purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by CITY OF LUBBOCK;FREESE AND NICHOLS and commissioned in 1994 and is currently owned by CITY OF LUBBOCK.

John T Montford Dam Structure

The John T Montford Dam is approximately 4,150 feet (1,265 m) long, 141 feet (43 m) high and has a structural volume of 20,155,167 cubic yards (15,409,734 cubic metres).

John T Montford Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 115,937 acre-ft (143,006 Ml) and maximum capacity of 354,500 acre-ft (437,269 Ml).

The surface area of the reservoir is 2,884 acres (1,167 ha) and the total catchment area is 394 square miles (1,020 square kilometres).

John T Montford Dam Spillway

The dam has a 1740 feet (530 m) wide uncontrolled spillway with a maximum discharge capacity of 363480 cubic feet per second (10293 cubic metres per second).

John T Montford Dam Compared to Four Famous American Dams

John T Montford Dam
Garza, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 141 730 550 357 216
Length (Ft) 4,150 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 354,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 394 167,800 74,100 3,611 108,355

John T Montford Dam Weather

Current Conditions at John T Montford Dam

Failed to fetch current weather data.

7-Day Forecast for John T Montford Dam

Failed to fetch weather forecast data.

John T Montford Dam Frequently Asked Questions

In which state is the John T Montford Dam?

John T Montford Dam is in Texas.

In which county is the John T Montford Dam?

John T Montford Dam is in Garza County.

How high is the John T Montford Dam?

John T Montford Dam is 141 feet high.

How long is the John T Montford Dam?

John T Montford Dam is 4,150 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG