Lake Placid Dam, Texas, USA

Home / USA / Texas / Lake Placid Dam

Quick Facts About Lake Placid Dam

Location: Guadalupe, Texas
Coordinates: 29.548446, -97.999636
River: Guadalupe River
Primary Purpose: Hydroelectric
Type: Earth Gravity
Commissioned: 1932
Dam Height: 47 ft (14 m)
Dam Length: 2,057 ft (627 m)
Dam Capacity: 5,650 acre-ft (6,969 Ml)

Lake Placid Dam Map

Here is a map of Lake Placid Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Placid Dam Information

Lake Placid Dam is an earth gravity dam located about 1 miles from Seguin, Guadalupe, Texas.

The dam, which is on the Guadalupe River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by DEVLIN ENG CO AMARILLO;NO DATA FOR ORIGINAL DESIGNER and commissioned in 1932 and is currently owned by GUADALUPE-BLANCO RIVER AUTHORITY.

Lake Placid Dam Structure

The Lake Placid Dam is approximately 2,057 feet (627 m) long, 47 feet (14 m) high and has a structural volume of cubic yards (0 cubic metres).

Lake Placid Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 750 acre-ft (925 Ml) and maximum capacity of 5,650 acre-ft (6,969 Ml).

The surface area of the reservoir is 248 acres (100 ha) and the total catchment area is 38 square miles (98 square kilometres).

Lake Placid Dam Spillway

The dam spillway has a maximum discharge capacity of 2 cubic feet per second (0 cubic metres per second).

Lake Placid Dam Compared to Four Famous American Dams

Lake Placid Dam
Guadalupe, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 47 730 550 357 216
Length (Ft) 2,057 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,650 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 38 167,800 74,100 3,611 108,355

Lake Placid Dam Weather

Current Conditions at Lake Placid Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Placid Dam

Failed to fetch weather forecast data.

Lake Placid Dam Frequently Asked Questions

In which state is the Lake Placid Dam?

Lake Placid Dam is in Texas.

In which county is the Lake Placid Dam?

Lake Placid Dam is in Guadalupe County.

How high is the Lake Placid Dam?

Lake Placid Dam is 47 feet high.

How long is the Lake Placid Dam?

Lake Placid Dam is 2,057 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG