Lake Sulphur Springs Dam

Lake Sulphur Springs Dam Quick Facts

Location: Hopkins, Texas
Coordinates: 33.179805, -95.617784
River: White Oak Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1973
Dam Height: 44 ft (13 m)
Dam Length: 6,232 ft (1,900 m)
Dam Capacity: 49,860 acre-ft (61,501 Ml)
Condition Assessment: Satisfactory
Share Lake Sulphur Springs Dam:

Lake Sulphur Springs Dam Map

Lake Sulphur Springs Dam Information

Lake Sulphur Springs Dam is an earthen embankment dam located about 1 miles from Sulphur Springs, Hopkins, Texas.

The dam, which is on the White Oak Creek River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by FREESE AND NICHOLS;FREESE AND NICHOLS and commissioned in 1973 and is currently owned by CITY OF SULPHUR SPRINGS.

Lake Sulphur Springs Dam Structure

The Lake Sulphur Springs Dam is approximately 6,232 feet (1,900 m) long, 44 feet (13 m) high and has a structural volume of cubic yards (0 cubic metres).

Lake Sulphur Springs Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 17,838 acre-ft (22,003 Ml) and maximum capacity of 49,860 acre-ft (61,501 Ml).

The surface area of the reservoir is 1,913 acres (774 ha) and the total catchment area is 66 square miles (172 square kilometres).

Lake Sulphur Springs Dam Spillway

The dam spillway has a maximum discharge capacity of 49801 cubic feet per second (1410 cubic metres per second).

Lake Sulphur Springs Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Lake Sulphur Springs Dam
Hopkins, Texas
Height (ft)
44
Length (Ft)
6,232
Storage Volume (acre-ft)
49,860
Drainage Area (sq miles)
66
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Lake Sulphur Springs Dam Weather

Current Conditions at Lake Sulphur Springs Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Sulphur Springs Dam

Failed to fetch weather forecast data.

Lake Sulphur Springs Dam Frequently Asked Questions

In which state is the Lake Sulphur Springs Dam?

Lake Sulphur Springs Dam is in Texas.

In which county is the Lake Sulphur Springs Dam?

Lake Sulphur Springs Dam is in Hopkins County.

How high is the Lake Sulphur Springs Dam?

Lake Sulphur Springs Dam is 44 feet high.

How long is the Lake Sulphur Springs Dam?

Lake Sulphur Springs Dam is 6,232 feet long.

Share Lake Sulphur Springs Dam:

More Dams in Hopkins County:

Lake Peewee Dam
Lake Sulphur Springs Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG