Max Starcke Dam, Texas, USA

Home / USA / Texas / Max Starcke Dam

Quick Facts About Max Starcke Dam

Location: Burnet, Texas
Coordinates: 30.556475, -98.256594
River: Colorado River
Primary Purpose: Hydroelectric
Type: Gravity
Commissioned: 1951
Dam Height: 99 ft (30 m)
Dam Length: 896 ft (273 m)
Dam Capacity: 8,760 acre-ft (10,805 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Max Starcke Dam Map

Here is a map of Max Starcke Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Max Starcke Dam Information

Max Starcke Dam is a gravity dam located about 32 miles from Austin, Burnet, Texas.

The dam, which is on the Colorado River, was primarily built for Hydroelectric purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by FREESE AND NICHOLS;FREESE AND NICHOLS and commissioned in 1951 and is currently owned by LOWER COLORADO RIVER AUTHORITY.

Max Starcke Dam Structure

The Max Starcke Dam is approximately 896 feet (273 m) long, 99 feet (30 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Max Starcke Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,760 acre-ft (10,805 Ml) and maximum capacity of 8,760 acre-ft (10,805 Ml).

The surface area of the reservoir is 780 acres (316 ha) and the total catchment area is 36,325 square miles (94,081 square kilometres).

Max Starcke Dam Spillway

The dam has a 608 feet (185 m) wide controlled spillway with a maximum discharge capacity of 421000 cubic feet per second (11921 cubic metres per second).

Max Starcke Dam Compared to Four Famous American Dams

Max Starcke Dam
Burnet, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 99 730 550 357 216
Length (Ft) 896 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,760 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 36,325 167,800 74,100 3,611 108,355

Max Starcke Dam Weather

Current Conditions at Max Starcke Dam

Failed to fetch current weather data.

7-Day Forecast for Max Starcke Dam

Failed to fetch weather forecast data.

Max Starcke Dam Frequently Asked Questions

In which state is the Max Starcke Dam?

Max Starcke Dam is in Texas.

In which county is the Max Starcke Dam?

Max Starcke Dam is in Burnet County.

How high is the Max Starcke Dam?

Max Starcke Dam is 99 feet high.

How long is the Max Starcke Dam?

Max Starcke Dam is 896 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG