Mitchell County Reservoir Dam

Mitchell County Reservoir Dam Quick Facts

Location: Mitchell, Texas
Coordinates: 32.24, -101.105
River: Tr-Beals Creek River
Primary Purpose: Tailings
Type: Earth Other
Commissioned: 1991
Dam Height: 70 ft (21 m)
Dam Length: 4,850 ft (1,478 m)
Dam Capacity: 50,241 acre-ft (61,971 Ml)
Hazard Potential: Significant
Share Mitchell County Reservoir Dam:

Mitchell County Reservoir Dam Map

Mitchell County Reservoir Dam Information

Mitchell County Reservoir Dam is an earth other dam located about 75 miles from Robert Lee, Mitchell, Texas.

The dam, which is on the Tr-Beals Creek River, was primarily built for Tailings purposes, but also serves for Other benefits.

The dam was designed by FREESE AND NICHOLS and commissioned in 1991 and is currently owned by COLORADO RIVER MUNICIPAL WATER DISTRICT.

Mitchell County Reservoir Dam Structure

The Mitchell County Reservoir Dam is approximately 4,850 feet (1,478 m) long, 70 feet (21 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Mitchell County Reservoir Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 32,000 acre-ft (39,471 Ml) and maximum capacity of 50,241 acre-ft (61,971 Ml).

The surface area of the reservoir is 1,603 acres (649 ha) and the total catchment area is 16 square miles (41 square kilometres).

Mitchell County Reservoir Dam Spillway

The dam has a 200 feet (61 m) wide uncontrolled spillway with a maximum discharge capacity of 19825 cubic feet per second (561 cubic metres per second).

Mitchell County Reservoir Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Mitchell County Reservoir Dam
Mitchell, Texas
Height (ft)
70
Length (Ft)
4,850
Storage Volume (acre-ft)
50,241
Drainage Area (sq miles)
16
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Mitchell County Reservoir Dam Weather

Current Conditions at Mitchell County Reservoir Dam

Failed to fetch current weather data.

7-Day Forecast for Mitchell County Reservoir Dam

Failed to fetch weather forecast data.

Mitchell County Reservoir Dam Frequently Asked Questions

In which state is the Mitchell County Reservoir Dam?

Mitchell County Reservoir Dam is in Texas.

In which county is the Mitchell County Reservoir Dam?

Mitchell County Reservoir Dam is in Mitchell County.

How high is the Mitchell County Reservoir Dam?

Mitchell County Reservoir Dam is 70 feet high.

How long is the Mitchell County Reservoir Dam?

Mitchell County Reservoir Dam is 4,850 feet long.

Share Mitchell County Reservoir Dam:

More Dams in Mitchell County:

Cawker City Dike (Waconda Lake)
Champion Creek Dam
Frd No 22 Dam
Frd No 24 Dam
Glen Elder Dam
Lake Colorado City Dam
Mitchell County Reservoir Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG