Mountain Creek WS SCS Site 10 Dam, Texas, USA

Home / USA / Texas / Mountain Creek WS SCS Site 10 Dam

Quick Facts About Mountain Creek WS SCS Site 10 Dam

Location: Ellis, Texas
Coordinates: 32.497974, -97.042139
River: Newton Branch River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1956
Dam Height: 46 ft (14 m)
Dam Length: 2,613 ft (796 m)
Dam Capacity: 6,911 acre-ft (8,524 Ml)

Mountain Creek WS SCS Site 10 Dam Map

Here is a map of Mountain Creek WS SCS Site 10 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mountain Creek WS SCS Site 10 Dam Information

Mountain Creek WS SCS Site 10 Dam is an earthen embankment dam located in Ellis County, Texas.

The dam, which is on the Newton Branch River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation benefits.

The dam was designed by USDA NRCS and commissioned in 1956 and is currently owned by DALWORTH SWCD;ELLIS COUNTY.

Mountain Creek WS SCS Site 10 Dam Structure

The Mountain Creek WS SCS Site 10 Dam is approximately 2,613 feet (796 m) long, 46 feet (14 m) high and has a structural volume of 196,257 cubic yards (150,049 cubic metres).

Mountain Creek WS SCS Site 10 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 200 acre-ft (247 Ml) and maximum capacity of 6,911 acre-ft (8,524 Ml).

The surface area of the reservoir is 89 acres (36 ha) and the total catchment area is 9 square miles (24 square kilometres).

Mountain Creek WS SCS Site 10 Dam Spillway

The dam has a 315 feet (96 m) wide uncontrolled spillway with a maximum discharge capacity of 26730 cubic feet per second (757 cubic metres per second).

Mountain Creek WS SCS Site 10 Dam Compared to Four Famous American Dams

Mountain Creek WS SCS Site 10 Dam
Ellis, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 46 730 550 357 216
Length (Ft) 2,613 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,911 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 9 167,800 74,100 3,611 108,355

Mountain Creek WS SCS Site 10 Dam Weather

Current Conditions at Mountain Creek WS SCS Site 10 Dam

Failed to fetch current weather data.

7-Day Forecast for Mountain Creek WS SCS Site 10 Dam

Failed to fetch weather forecast data.

Mountain Creek WS SCS Site 10 Dam Frequently Asked Questions

In which state is the Mountain Creek WS SCS Site 10 Dam?

Mountain Creek WS SCS Site 10 Dam is in Texas.

In which county is the Mountain Creek WS SCS Site 10 Dam?

Mountain Creek WS SCS Site 10 Dam is in Ellis County.

How high is the Mountain Creek WS SCS Site 10 Dam?

Mountain Creek WS SCS Site 10 Dam is 46 feet high.

How long is the Mountain Creek WS SCS Site 10 Dam?

Mountain Creek WS SCS Site 10 Dam is 2,613 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG