Pat Mayse Dam

Pat Mayse Dam Quick Facts

Location: Lamar, Texas
Coordinates: 33.853329, -95.548332
River: Sanders Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1967
Dam Height: 96 ft (29 m)
Dam Length: 7,080 ft (2,158 m)
Dam Capacity: 457,800 acre-ft (564,687 Ml)
Condition Assessment: Not Available
Share Pat Mayse Dam:

Pat Mayse Dam Map

Pat Mayse Dam Information

Pat Mayse Dam is an earthen embankment dam located in Chicota, Lamar, Texas.

The dam, which is on the Sanders Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by CESWT and commissioned in 1967 and is currently owned by USACE – Tulsa District.

Pat Mayse Dam Structure

The Pat Mayse Dam is approximately 7,080 feet (2,158 m) long, 96 feet (29 m) high and has a structural volume of 5,580,000 cubic yards (4,266,217 cubic metres).

Pat Mayse Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 189,100 acre-ft (233,251 Ml) and maximum capacity of 457,800 acre-ft (564,687 Ml).

The surface area of the reservoir is 5,993 acres (2,425 ha) and the total catchment area is 175 square miles (453 square kilometres).

Pat Mayse Dam Spillway

The dam has a 100 feet (30 m) wide uncontrolled spillway with a maximum discharge capacity of 4450 cubic feet per second (126 cubic metres per second).

Pat Mayse Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Pat Mayse Dam
Lamar, Texas
Height (ft)
96
Length (Ft)
7,080
Storage Volume (acre-ft)
457,800
Drainage Area (sq miles)
175
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Pat Mayse Dam Weather

Current Conditions at Pat Mayse Dam

Failed to fetch current weather data.

7-Day Forecast for Pat Mayse Dam

Failed to fetch weather forecast data.

Pat Mayse Dam Frequently Asked Questions

In which state is the Pat Mayse Dam?

Pat Mayse Dam is in Texas.

In which county is the Pat Mayse Dam?

Pat Mayse Dam is in Lamar County.

How high is the Pat Mayse Dam?

Pat Mayse Dam is 96 feet high.

How long is the Pat Mayse Dam?

Pat Mayse Dam is 7,080 feet long.

Share Pat Mayse Dam:

More Dams in Lamar County:

Deport Creek WS SCS Site 1 Dam
Lake Crook Dam
Pat Mayse Dam
Tobesofkee Creek Str # 70 Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG