Rush Creek WS SCS Site 10 Dam, Texas, USA

Home / USA / Texas / Rush Creek WS SCS Site 10 Dam

Quick Facts About Rush Creek WS SCS Site 10 Dam

Location: Comanche, Texas
Coordinates: 31.931313, -98.774204
River: Jimmys Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1973
Dam Height: 67 ft (20 m)
Dam Length: 3,520 ft (1,073 m)
Dam Capacity: 7,444 acre-ft (9,182 Ml)

Rush Creek WS SCS Site 10 Dam Map

Here is a map of Rush Creek WS SCS Site 10 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Rush Creek WS SCS Site 10 Dam Information

Rush Creek WS SCS Site 10 Dam is an earthen embankment dam located about 3 miles from Sidney, Comanche, Texas.

The dam, which is on the Jimmys Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Fire Protection, Stock, Or Small Fish Pond, Irrigation and Recreation benefits.

The dam was designed by USDA NRCS and commissioned in 1973 and is currently owned by COMANCHE COUNTY;UPPER LEON SWCD.

Rush Creek WS SCS Site 10 Dam Structure

The Rush Creek WS SCS Site 10 Dam is approximately 3,520 feet (1,073 m) long, 67 feet (20 m) high and has a structural volume of 438,572 cubic yards (335,312 cubic metres).

Rush Creek WS SCS Site 10 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 657 acre-ft (810 Ml) and maximum capacity of 7,444 acre-ft (9,182 Ml).

The surface area of the reservoir is 480 acres (194 ha) and the total catchment area is 16 square miles (42 square kilometres).

Rush Creek WS SCS Site 10 Dam Spillway

The dam has a 206 feet (63 m) wide uncontrolled spillway with a maximum discharge capacity of 8341 cubic feet per second (236 cubic metres per second).

Rush Creek WS SCS Site 10 Dam Compared to Four Famous American Dams

Rush Creek WS SCS Site 10 Dam
Comanche, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 67 730 550 357 216
Length (Ft) 3,520 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,444 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 16 167,800 74,100 3,611 108,355

Rush Creek WS SCS Site 10 Dam Weather

Current Conditions at Rush Creek WS SCS Site 10 Dam

Failed to fetch current weather data.

7-Day Forecast for Rush Creek WS SCS Site 10 Dam

Failed to fetch weather forecast data.

Rush Creek WS SCS Site 10 Dam Frequently Asked Questions

In which state is the Rush Creek WS SCS Site 10 Dam?

Rush Creek WS SCS Site 10 Dam is in Texas.

In which county is the Rush Creek WS SCS Site 10 Dam?

Rush Creek WS SCS Site 10 Dam is in Comanche County.

How high is the Rush Creek WS SCS Site 10 Dam?

Rush Creek WS SCS Site 10 Dam is 67 feet high.

How long is the Rush Creek WS SCS Site 10 Dam?

Rush Creek WS SCS Site 10 Dam is 3,520 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG