Sanford Dam, Texas, USA

Home / USA / Texas / Sanford Dam

Quick Facts About Sanford Dam

Location: Hutchinson, Texas
Coordinates: 35.7142, -101.5525
River: Canadian River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1965
Dam Height: 228 ft (69 m)
Dam Length: 6,380 ft (1,945 m)
Dam Capacity: 2,385,983 acre-ft (2,943,062 Ml)
Condition Assessment: Not Available

Sanford Dam Map

Here is a map of Sanford Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sanford Dam Information

Sanford Dam is an earthen embankment dam located about 65 miles from Canadian, Hutchinson, Texas.

The dam, which is on the Canadian River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by US Bureau of Reclamation and commissioned in 1965 and is currently owned by US Bureau of Reclamation.

Sanford Dam Structure

The Sanford Dam is approximately 6,380 feet (1,945 m) long, 228 feet (69 m) high and has a structural volume of 15,398,000 cubic yards (11,772,618 cubic metres).

Sanford Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 945,400 acre-ft (1,166,132 Ml) and maximum capacity of 2,385,983 acre-ft (2,943,062 Ml).

The surface area of the reservoir is 16,513 acres (6,683 ha) and the total catchment area is 20,220 square miles (52,370 square kilometres).

Sanford Dam Spillway

The dam has a 61 feet (19 m) wide uncontrolled spillway with a maximum discharge capacity of 61100 cubic feet per second (1730 cubic metres per second).

Sanford Dam Compared to Four Famous American Dams

Sanford Dam
Hutchinson, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 228 730 550 357 216
Length (Ft) 6,380 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 2,385,983 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20,220 167,800 74,100 3,611 108,355

Sanford Dam Weather

Current Conditions at Sanford Dam

Failed to fetch current weather data.

7-Day Forecast for Sanford Dam

Failed to fetch weather forecast data.

Sanford Dam Frequently Asked Questions

In which state is the Sanford Dam?

Sanford Dam is in Texas.

In which county is the Sanford Dam?

Sanford Dam is in Hutchinson County.

How high is the Sanford Dam?

Sanford Dam is 228 feet high.

How long is the Sanford Dam?

Sanford Dam is 6,380 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG