Three Mile and Sulfur Draw WS SCS Site 2 Dam, Texas, USA

Quick Facts About Three Mile and Sulfur Draw WS SCS Site 2 Dam

Location: Culberson, Texas
Coordinates: 31.065874, -104.860225
River: Three Mile Draw River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1984
Dam Height: 60 ft (18 m)
Dam Length: 2,600 ft (792 m)
Dam Capacity: 7,095 acre-ft (8,752 Ml)
Condition Assessment: Satisfactory

Three Mile and Sulfur Draw WS SCS Site 2 Dam Map

Here is a map of Three Mile and Sulfur Draw WS SCS Site 2 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Three Mile and Sulfur Draw WS SCS Site 2 Dam Information

Three Mile and Sulfur Draw WS SCS Site 2 Dam is an earthen embankment dam located about 2 miles from Van Horn, Culberson, Texas.

The dam, which is on the Three Mile Draw River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 1984 and is currently owned by CITY OF VAN HORN;CULBERSON COUNTY;HIGHPOINT SWCD.

Three Mile and Sulfur Draw WS SCS Site 2 Dam Structure

The Three Mile and Sulfur Draw WS SCS Site 2 Dam is approximately 2,600 feet (792 m) long, 60 feet (18 m) high and has a structural volume of 502,340 cubic yards (384,067 cubic metres).

Three Mile and Sulfur Draw WS SCS Site 2 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 424 acre-ft (523 Ml) and maximum capacity of 7,095 acre-ft (8,752 Ml).

The surface area of the reservoir is 35 acres (14 ha) and the total catchment area is 27 square miles (69 square kilometres).

Three Mile and Sulfur Draw WS SCS Site 2 Dam Spillway

The dam has a 453 feet (138 m) wide uncontrolled spillway with a maximum discharge capacity of 70607 cubic feet per second (1999 cubic metres per second).

Three Mile and Sulfur Draw WS SCS Site 2 Dam Compared to Four Famous American Dams

Three Mile and Sulfur Draw WS SCS Site 2 Dam
Culberson, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 60 730 550 357 216
Length (Ft) 2,600 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,095 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 27 167,800 74,100 3,611 108,355

Three Mile and Sulfur Draw WS SCS Site 2 Dam Weather

Current Conditions at Three Mile and Sulfur Draw WS SCS Site 2 Dam

Failed to fetch current weather data.

7-Day Forecast for Three Mile and Sulfur Draw WS SCS Site 2 Dam

Failed to fetch weather forecast data.

Three Mile and Sulfur Draw WS SCS Site 2 Dam Frequently Asked Questions

In which state is the Three Mile and Sulfur Draw WS SCS Site 2 Dam?

Three Mile and Sulfur Draw WS SCS Site 2 Dam is in Texas.

In which county is the Three Mile and Sulfur Draw WS SCS Site 2 Dam?

Three Mile and Sulfur Draw WS SCS Site 2 Dam is in Culberson County.

How high is the Three Mile and Sulfur Draw WS SCS Site 2 Dam?

Three Mile and Sulfur Draw WS SCS Site 2 Dam is 60 feet high.

How long is the Three Mile and Sulfur Draw WS SCS Site 2 Dam?

Three Mile and Sulfur Draw WS SCS Site 2 Dam is 2,600 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG