Whitehouse Dam, Texas, USA

Home / USA / Texas / Whitehouse Dam

Quick Facts About Whitehouse Dam

Location: Smith, Texas
Coordinates: 32.208816, -95.169241
River: Prairie Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1949
Dam Height: 50 ft (15 m)
Dam Length: 4,709 ft (1,435 m)
Dam Capacity: 85,810 acre-ft (105,845 Ml)
Condition Assessment: Satisfactory

Whitehouse Dam Map

Here is a map of Whitehouse Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Whitehouse Dam Information

Whitehouse Dam is an earthen embankment dam located in Smith County, Texas.

The dam, which is on the Prairie Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by T C FORREST JR;WISENBAKER FIX & ASSOCIATES and commissioned in 1949 and is currently owned by CITY OF TYLER.

Whitehouse Dam Structure

The Whitehouse Dam is approximately 4,709 feet (1,435 m) long, 50 feet (15 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Whitehouse Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 42,500 acre-ft (52,423 Ml) and maximum capacity of 85,810 acre-ft (105,845 Ml).

The surface area of the reservoir is 3,584 acres (1,450 ha) and the total catchment area is 45 square miles (117 square kilometres).

Whitehouse Dam Spillway

The dam has a 200 feet (61 m) wide uncontrolled spillway with a maximum discharge capacity of 32666 cubic feet per second (925 cubic metres per second).

Whitehouse Dam Compared to Four Famous American Dams

Whitehouse Dam
Smith, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 50 730 550 357 216
Length (Ft) 4,709 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 85,810 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 45 167,800 74,100 3,611 108,355

Whitehouse Dam Weather

Current Conditions at Whitehouse Dam

Failed to fetch current weather data.

7-Day Forecast for Whitehouse Dam

Failed to fetch weather forecast data.

Whitehouse Dam Frequently Asked Questions

In which state is the Whitehouse Dam?

Whitehouse Dam is in Texas.

In which county is the Whitehouse Dam?

Whitehouse Dam is in Smith County.

How high is the Whitehouse Dam?

Whitehouse Dam is 50 feet high.

How long is the Whitehouse Dam?

Whitehouse Dam is 4,709 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG