Williamson Dam, Texas, USA

Home / USA / Texas / Williamson Dam

Quick Facts About Williamson Dam

Location: Eastland, Texas
Coordinates: 32.439444, -98.984444
River: Sandy Creek River
Primary Purpose: Water Supply
Type: Buttress
Commissioned: 1923
Dam Height: 96 ft (29 m)
Dam Length: 1,064 ft (324 m)
Dam Capacity: 32,800 acre-ft (40,458 Ml)
Condition Assessment: Unsatisfactory

Williamson Dam Map

Here is a map of Williamson Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Williamson Dam Information

Williamson Dam is a buttress dam located in Eastland County, Texas.

The dam, which is on the Sandy Creek River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by ELROD ENGINEERING and commissioned in 1923 and is currently owned by CITY OF CISCO.

Williamson Dam Structure

The Williamson Dam is approximately 1,064 feet (324 m) long, 96 feet (29 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Williamson Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 26,000 acre-ft (32,070 Ml) and maximum capacity of 32,800 acre-ft (40,458 Ml).

The surface area of the reservoir is 1,817 acres (735 ha) and the total catchment area is 26 square miles (67 square kilometres).

Williamson Dam Spillway

The dam has a 270 feet (82 m) wide uncontrolled spillway with a maximum discharge capacity of 25600 cubic feet per second (725 cubic metres per second).

Williamson Dam Compared to Four Famous American Dams

Williamson Dam
Eastland, Texas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 96 730 550 357 216
Length (Ft) 1,064 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 32,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 26 167,800 74,100 3,611 108,355

Williamson Dam Weather

Current Conditions at Williamson Dam

Failed to fetch current weather data.

7-Day Forecast for Williamson Dam

Failed to fetch weather forecast data.

Williamson Dam Frequently Asked Questions

In which state is the Williamson Dam?

Williamson Dam is in Texas.

In which county is the Williamson Dam?

Williamson Dam is in Eastland County.

How high is the Williamson Dam?

Williamson Dam is 96 feet high.

How long is the Williamson Dam?

Williamson Dam is 1,064 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG