Flaming Gorge Dam Quick Facts
Flaming Gorge Dam Map
Flaming Gorge Dam Information
Flaming Gorge Dam is a concrete arch dam located about 35 miles from Greendale Junction, Daggett, Utah.
The dam, which is on the Green River, was primarily built for flood risk reduction purposes, but also serves for Recreation, Hydroelectric and Water Supply benefits.
The dam was designed by and commissioned in 1963 and is currently owned by US Bureau of Reclamation.
Flaming Gorge Dam Structure
The Flaming Gorge Dam is approximately 1,285 feet (392 m) long, 502 feet (153 m) high and has a structural volume of 986,600 cubic yards (754,310 cubic metres).
Flaming Gorge Dam Storage Capacity & Surface Area
The reservoir has a normal storage capacity of 3,788,900 acre-ft (4,673,532 Ml) and maximum capacity of 4,003,100 acre-ft (4,937,744 Ml).
The surface area of the reservoir is 42,040 acres (17,013 ha) and the total catchment area is 15,000 square miles (38,850 square kilometres).
Flaming Gorge Dam Spillway
The dam has a 34 feet (10 m) wide controlled spillway with a maximum discharge capacity of 28800 cubic feet per second (816 cubic metres per second).
Flaming Gorge Dam Compared to Five Famous American Dams
Flaming Gorge Dam Weather
Current Conditions at Flaming Gorge Dam
| Parameter | Value |
|---|---|
| Current Time | 18:56 |
| Sunrise | 07:32 |
| Sunset | 16:49 |
| Temperature (°F) | 25 |
| Feels Like (°F) | 18 |
| Cloud Coverage (%) | 97 |
| Pressure (inHg) | 1026 |
| Humidity (%) | 59 |
| Wind Speed (mph) | 6 |
| Rain (mm) | 0 |
7-Day Forecast for Flaming Gorge Dam
| Day | Min Temp (°F) | Max Temp (°F) | Feels Like (°F) | Pressure (inHg) | Humidity (%) | Wind Speed (mph) | Wind Gust (mph) | Wind Dir | Precip Prob (%) | Precip Volume (mm) | Weather |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Today | 20 | 36 | 31 | 1025 | 42 | 6 | 9 | SSE | 0 | - |  |
| Thu | 24 | 40 | 33 | 1013 | 32 | 9 | 13 | SSE | 0 | - |  |
| Fri | 27 | 39 | 33 | 1014 | 39 | 10 | 15 | NNW | 0 | - | |
| Sat | 25 | 40 | 33 | 1022 | 44 | 10 | 21 | SSE | 0 | - | |
| Sun | 27 | 41 | 35 | 1018 | 65 | 14 | 23 | WNW | 4 | - | |
| Mon | 26 | 38 | 29 | 1028 | 51 | 9 | 12 | SSE | 0 | - | |
| Tue | 27 | 37 | 34 | 1017 | 53 | 18 | 34 | WNW | 87 | - |  |
| Wed | 23 | 34 | 22 | 1033 | 46 | 16 | 24 | NW | 0 | - |  |
Flaming Gorge Dam Frequently Asked Questions
Flaming Gorge Dam is in Utah.
Flaming Gorge Dam is in Daggett County.
Flaming Gorge Dam is 502 feet high.
Flaming Gorge Dam is 1,285 feet long.
Condition Assessment Classification
Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Source: National Inventory of Dams