Wrightsville Dam, Vermont, USA

Home / USA / Vermont / Wrightsville Dam

Quick Facts About Wrightsville Dam

Location: Washington, Vermont
Coordinates: 44.310684, -72.5744324
River: North Branch Winooski River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1935
Dam Height: 115 ft (35 m)
Dam Length: 1,525 ft (465 m)
Dam Capacity: 36,000 acre-ft (44,405 Ml)

Wrightsville Dam Map

Here is a map of Wrightsville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Wrightsville Dam Information

Wrightsville Dam is an earthen embankment dam located in Middlesex, Washington, Vermont.

The dam, which is on the North Branch Winooski River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Hydroelectric benefits.

The dam was designed by USACE and commissioned in 1935 and is currently owned by STATE OF VERMONT – DEC.

Wrightsville Dam Structure

The Wrightsville Dam is approximately 1,525 feet (465 m) long, 115 feet (35 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Wrightsville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 36,000 acre-ft (44,405 Ml).

The surface area of the reservoir is 190 acres (77 ha) and the total catchment area is 68 square miles (176 square kilometres).

Wrightsville Dam Spillway

According to the latest available data, the Wrightsville Dam does not have any spillways.

Wrightsville Dam Compared to Four Famous American Dams

Wrightsville Dam
Washington, Vermont
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 115 730 550 357 216
Length (Ft) 1,525 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 36,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 68 167,800 74,100 3,611 108,355

Wrightsville Dam Weather

Current Conditions at Wrightsville Dam

Failed to fetch current weather data.

7-Day Forecast for Wrightsville Dam

Failed to fetch weather forecast data.

Wrightsville Dam Frequently Asked Questions

In which state is the Wrightsville Dam?

Wrightsville Dam is in Vermont.

In which county is the Wrightsville Dam?

Wrightsville Dam is in Washington County.

How high is the Wrightsville Dam?

Wrightsville Dam is 115 feet high.

How long is the Wrightsville Dam?

Wrightsville Dam is 1,525 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG