Leesville Dam, Virginia, USA

Home / USA / Virginia / Leesville Dam

Quick Facts About Leesville Dam

Location: Pittsylvania, Virginia
Coordinates: 37.092597, -79.40221
River: Roanoke River
Primary Purpose: Hydroelectric
Type: Gravity Concrete
Commissioned: 1963
Dam Height: 90 ft (27 m)
Dam Length: 980 ft (299 m)
Dam Capacity: 94,960 acre-ft (117,131 Ml)
Condition Assessment: Satisfactory

Leesville Dam Map

Here is a map of Leesville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Leesville Dam Information

Leesville Dam is a gravity concrete dam located about 8 miles from Leesville, Pittsylvania, Virginia.

The dam, which is on the Roanoke River, was primarily built for Hydroelectric purposes, but also serves for benefits.

The dam was designed by and commissioned in 1963 and is currently owned by Appalachian Power Company.

Leesville Dam Structure

The Leesville Dam is approximately 980 feet (299 m) long, 90 feet (27 m) high and has a structural volume of cubic yards (0 cubic metres).

Leesville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 94,960 acre-ft (117,131 Ml) and maximum capacity of 94,960 acre-ft (117,131 Ml).

The surface area of the reservoir is 3,270 acres (1,323 ha) and the total catchment area is 1,505 square miles (3,898 square kilometres).

Leesville Dam Spillway

The dam spillway has a maximum discharge capacity of 162000 cubic feet per second (4587 cubic metres per second).

Leesville Dam Compared to Four Famous American Dams

Leesville Dam
Pittsylvania, Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 90 730 550 357 216
Length (Ft) 980 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 94,960 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,505 167,800 74,100 3,611 108,355

Leesville Dam Weather

Current Conditions at Leesville Dam

Failed to fetch current weather data.

7-Day Forecast for Leesville Dam

Failed to fetch weather forecast data.

Leesville Dam Frequently Asked Questions

In which state is the Leesville Dam?

Leesville Dam is in Virginia.

In which county is the Leesville Dam?

Leesville Dam is in Pittsylvania County.

How high is the Leesville Dam?

Leesville Dam is 90 feet high.

How long is the Leesville Dam?

Leesville Dam is 980 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG