Waller Mill Dam, Virginia, USA

Home / USA / Virginia / Waller Mill Dam

Quick Facts About Waller Mill Dam

Location: York, Virginia
Coordinates: 37.3031, -76.702
River: Queens Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned:
Dam Height: 40 ft (12 m)
Dam Length: 1,190 ft (363 m)
Dam Capacity: 7,274 acre-ft (8,972 Ml)

Waller Mill Dam Map

Here is a map of Waller Mill Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Waller Mill Dam Information

Waller Mill Dam is an earthen embankment dam located in York County, Virginia.

The dam, which is on the Queens Creek River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by Wiley | Wilson and commissioned in and is currently owned by City of Williamsburg.

Waller Mill Dam Structure

The Waller Mill Dam is approximately 1,190 feet (363 m) long, 40 feet (12 m) high and has a structural volume of cubic yards (0 cubic metres).

Waller Mill Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,603 acre-ft (5,678 Ml) and maximum capacity of 7,274 acre-ft (8,972 Ml).

The surface area of the reservoir is 351 acres (142 ha) and the total catchment area is 7 square miles (18 square kilometres).

Waller Mill Dam Spillway

According to the latest available data, the Waller Mill Dam does not have any spillways.

Waller Mill Dam Compared to Four Famous American Dams

Waller Mill Dam
York, Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 40 730 550 357 216
Length (Ft) 1,190 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,274 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 7 167,800 74,100 3,611 108,355

Waller Mill Dam Weather

Current Conditions at Waller Mill Dam

Failed to fetch current weather data.

7-Day Forecast for Waller Mill Dam

Failed to fetch weather forecast data.

Waller Mill Dam Frequently Asked Questions

In which state is the Waller Mill Dam?

Waller Mill Dam is in Virginia.

In which county is the Waller Mill Dam?

Waller Mill Dam is in York County.

How high is the Waller Mill Dam?

Waller Mill Dam is 40 feet high.

How long is the Waller Mill Dam?

Waller Mill Dam is 1,190 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG