Boundary Dam, Washington, USA

Home / USA / Washington / Boundary Dam

Quick Facts About Boundary Dam

Location: Pend Oreille, Washington
Coordinates: 48.987, -117.3482
River: Pend Oreille River
Primary Purpose: Hydroelectric
Type: Concrete Arch Gravity
Commissioned: 1967
Dam Height: 340 ft (104 m)
Dam Length: 740 ft (226 m)
Dam Capacity: 95,000 acre-ft (117,181 Ml)

Boundary Dam Map

Here is a map of Boundary Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Boundary Dam Information

Boundary Dam is a concrete arch gravity dam located about 23 miles from Northport, Pend Oreille, Washington.

The dam, which is on the Pend Oreille River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by Bechtel- Leeds Hill and commissioned in 1967 and is currently owned by City of Seattle.

Boundary Dam Structure

The Boundary Dam is approximately 740 feet (226 m) long, 340 feet (104 m) high and has a structural volume of 150,500 cubic yards (115,066 cubic metres).

Boundary Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 95,000 acre-ft (117,181 Ml) and maximum capacity of 95,000 acre-ft (117,181 Ml).

The surface area of the reservoir is 1,668 acres (675 ha) and the total catchment area is 25,200 square miles (65,268 square kilometres).

Boundary Dam Spillway

The dam spillway has a maximum discharge capacity of 360000 cubic feet per second (10194 cubic metres per second).

Boundary Dam Compared to Four Famous American Dams

Boundary Dam
Pend Oreille, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 340 730 550 357 216
Length (Ft) 740 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 95,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 25,200 167,800 74,100 3,611 108,355

Boundary Dam Weather

Current Conditions at Boundary Dam

Failed to fetch current weather data.

7-Day Forecast for Boundary Dam

Failed to fetch weather forecast data.

Boundary Dam Frequently Asked Questions

In which state is the Boundary Dam?

Boundary Dam is in Washington.

In which county is the Boundary Dam?

Boundary Dam is in Pend Oreille County.

How high is the Boundary Dam?

Boundary Dam is 340 feet high.

How long is the Boundary Dam?

Boundary Dam is 740 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG